181 LIBERTY STREET, MARLBOROUGH, MA 01752 · OSHA inspection 1768061 · citation issued Oct 7, 2026 · prepared Saturday, November 21, 2026
Independent software. Not affiliated with OSHA. Not legal advice. Prepared from the public OSHA enforcement record for the employer to review, complete and sign. Not a filing, not legal advice and not a statement of what OSHA will accept.
1. Certification letter
Abatement certification · draft
To: Area Director, OSHA Boston North Area Office Address: as printed on your citation
OMTEC CORPORATION 181 LIBERTY STREET, MARLBOROUGH, MA 01752
The hazards referenced in Inspection Number 1768061 for the violations identified below were corrected as follows:
Citation 1, Item 1 was corrected on date to be entered by: method to be enteredAwaiting your confirmation · not certified
Citation 1, Item 2 was corrected on date to be entered by: method to be enteredAwaiting your confirmation · not certified
Citation 1, Item 3 was corrected on date to be entered by: method to be enteredAwaiting your confirmation · not certified
Citation 1, Item 4 was corrected on date to be entered by: method to be enteredAwaiting your confirmation · not certified
Citation 1, Item 5 was corrected on date to be entered by: method to be enteredAwaiting your confirmation · not certified
Citation 1, Item 6 was corrected on date to be entered by: method to be enteredAwaiting your confirmation · not certified
Citation 1, Item 7a was corrected on date to be entered by: method to be enteredAwaiting your confirmation · not certified
Citation 1, Item 7b was corrected on date to be entered by: method to be enteredAwaiting your confirmation · not certified
Citation 1, Item 7c was corrected on date to be entered by: method to be enteredAwaiting your confirmation · not certified
Citation 1, Item 7d was corrected on date to be entered by: method to be enteredAwaiting your confirmation · not certified
Citation 1, Item 7e was corrected on date to be entered by: method to be enteredAwaiting your confirmation · not certified
Citation 1, Item 7f was corrected on date to be entered by: method to be enteredAwaiting your confirmation · not certified
Citation 1, Item 7g was corrected on date to be entered by: method to be enteredAwaiting your confirmation · not certified
Citation 2, Item 1 was corrected on date to be entered by: method to be enteredAwaiting your confirmation · not certified
Citation 3, Item 1 was corrected on date to be entered by: method to be enteredAwaiting your confirmation · not certified
Citation 3, Item 2 was corrected on date to be entered by: method to be enteredAwaiting your confirmation · not certified
I attest that the information contained in this document is accurate and that the affected employees and their representatives have been informed of the abatement.
Signature
Typed or printed name
Title
Date
Signed by the employer or an authorized representative. CiteClock never signs or certifies for you.
Energy control (lockout/tagout) program · Plain-English summary, not legal advice
The employer must have an energy control program made up of written procedures, employee training and periodic inspections, so that before anyone services or maintains a machine that could start up or release stored energy unexpectedly, it is isolated from its energy source and made inoperative.
Other-than-serious item under 29 CFR 1903.19(d)(1)
Nov 12, 2026 per the public record · certification generally due Nov 22, 2026 (estimate)
Public record: No abatement completion recorded in the public data.
Not yet confirmed by the employer. Nothing is certified for this item.
Evidence on file: 0 files
Possible supporting evidence
Photo of the corrected condition
Repair invoice, receipt or work order
Training roster, if employees were trained
Written program or procedure page, if one was changed
Suggestions only, not a statement of what OSHA requires or will accept.
3. Employee posting
Employee posting
Notice to employees: abatement certification
Prepared with CiteClock from the employer's certification. This is not an official OSHA-issued form.
OMTEC CORPORATION will certify to the Occupational Safety and Health Administration that the conditions cited in inspection 1768061 and listed below have been corrected. A copy of the certification is available from the employer on request.
Each item below is listed on the final notice once you confirm it.
Post this notice near the place where each violation occurred, or where affected employees will readily see it, at the same time as or before the certification is sent to OSHA, for 3 working days (29 CFR 1903.19(g)).
Posted on
Removed on
Posted by
4. Where to send it
Where to send this
OSHA Boston North Area Office
Identified from the office code in the public record (0134000). Send it to the address printed on your citation. OSHA office directory
Keep a copy of everything you send and the date you sent it.
Still needed from you
Your confirmation that all 16 items have been corrected, with the date and how
A check of the abatement dates against your citation copy
The name and title of the person signing
Signature of the employer or an authorized representative
Abatement dates are shown per the public record. If a settlement, petition or informal agreement changed your dates or items, use those.
Certification is generally due within 10 calendar days after each abatement date (29 CFR 1903.19(c)).
No certification date is estimated for an item the public record shows as contested, settled or otherwise changed, or for a record not confirmed as Federal OSHA. Those items say "Verification required": check them against your citation, settlement agreement or final order.
No certification is required for an item your citation notes as corrected during the inspection (29 CFR 1903.19(c)(2)). The public data may say so too, but your citation is what counts.
Only certify items that are actually corrected. Knowingly false statements in documents required by the OSH Act are a federal offense (29 U.S.C. 666(g)).
The evidence ideas are suggestions, not a statement of what OSHA requires or will accept for a particular item.
29 CFR 1903.19 on eCFR · Independent software. Not affiliated with OSHA. Not legal advice.