1070 ROBERT FULTON HIGHWAY, QUARRYVILLE, PA 17566 · OSHA inspection 1787199 · citation issued May 8, 2025 · prepared Sunday, November 22, 2026
Independent software. Not affiliated with OSHA. Not legal advice. Prepared from the public OSHA enforcement record for the employer to review, complete and sign. Not a filing, not legal advice and not a statement of what OSHA will accept.
1. Certification letter
Abatement certification · draft
To: Area Director, OSHA Harrisburg Area Office Address: as printed on your citation
STONER, INC. 1070 ROBERT FULTON HIGHWAY, QUARRYVILLE, PA 17566
The hazards referenced in Inspection Number 1787199 for the violations identified below were corrected as follows:
Citation 1, Item 1 was corrected on date to be entered by: method to be enteredAwaiting your confirmation · not certified
Citation 1, Item 2 was corrected on date to be entered by: method to be enteredAwaiting your confirmation · not certified
Citation 1, Item 3 was corrected on date to be entered by: method to be enteredAwaiting your confirmation · not certified
Citation 1, Item 4a was corrected on date to be entered by: method to be enteredAwaiting your confirmation · not certified
Citation 1, Item 4b was corrected on date to be entered by: method to be enteredAwaiting your confirmation · not certified
Citation 1, Item 9a was corrected on date to be entered by: method to be enteredAwaiting your confirmation · not certified
Citation 1, Item 9b was corrected on date to be entered by: method to be enteredAwaiting your confirmation · not certified
Citation 1, Item 9c was corrected on date to be entered by: method to be enteredAwaiting your confirmation · not certified
Citation 1, Item 9d was corrected on date to be entered by: method to be enteredAwaiting your confirmation · not certified
Citation 1, Item 11 was corrected on date to be entered by: method to be enteredAwaiting your confirmation · not certified
Citation 1, Item 12 was corrected on date to be entered by: method to be enteredAwaiting your confirmation · not certified
Citation 1, Item 14a was corrected on date to be entered by: method to be enteredAwaiting your confirmation · not certified
Citation 1, Item 14b was corrected on date to be entered by: method to be enteredAwaiting your confirmation · not certified
I attest that the information contained in this document is accurate and that the affected employees and their representatives have been informed of the abatement.
Signature
Typed or printed name
Title
Date
Signed by the employer or an authorized representative. CiteClock never signs or certifies for you.
General Duty Clause · Plain-English summary, not legal advice
Section 5(a)(1) of the OSH Act requires each employer to provide employment and a place of employment free from recognized hazards that are causing or are likely to cause death or serious physical harm to employees. Your citation describes the hazard it refers to.
Verification required. No abatement date in the public record. Use the date on your citation.
Public record: Recorded in the public data as corrected during the inspection.
Not yet confirmed by the employer. Nothing is certified for this item.
The public record shows this item as corrected during the inspection. If your citation notes that, no certification is needed for it (29 CFR 1903.19(c)(2)).
Evidence on file: 0 files
Possible supporting evidence
Photo of the corrected condition
Written procedure or program page that addresses the hazard
Training roster
Invoice for equipment or engineering changes
Serious item: attach documents if your citation says they are required (1903.19(d)).
Suggestions only, not a statement of what OSHA requires or will accept.
Fall protection at unprotected sides and edges · Plain-English summary, not legal advice
Each employee on a walking-working surface with an unprotected side or edge 4 feet or more above a lower level must be protected by guardrails, a safety net, or a personal fall protection system (fall arrest, travel restraint or positioning), except where the section provides otherwise.
Oct 1, 2026 per the public record · Verification required, no certification date estimated. Contested on June 3, 2025, then formal settlement on February 25, 2026, per the public record. After a contest, the abatement date is set by the final order or the formal settlement agreement (29 CFR 1903.19(b)(2)(ii)), so check the date against that document. The abatement date in the public record is October 1, 2026.
Public record: No abatement completion recorded in the public data.
Not yet confirmed by the employer. Nothing is certified for this item.
Evidence on file: 0 files
Possible supporting evidence
Photo of the corrected walking-working surface, railing or ladder
Invoice for repair or replacement
Inspection record
Suggestions only, not a statement of what OSHA requires or will accept.
Oct 1, 2026 per the public record · Verification required, no certification date estimated. Contested on June 3, 2025, then formal settlement on February 25, 2026, per the public record. After a contest, the abatement date is set by the final order or the formal settlement agreement (29 CFR 1903.19(b)(2)(ii)), so check the date against that document. The abatement date in the public record is October 1, 2026.
Public record: No abatement completion recorded in the public data.
Not yet confirmed by the employer. Nothing is certified for this item.
Evidence on file: 0 files
Possible supporting evidence
Photo of the cleared or marked exit route
Page of your emergency action or fire prevention plan
Training roster
Serious item: attach documents if your citation says they are required (1903.19(d)).
Suggestions only, not a statement of what OSHA requires or will accept.
Oct 1, 2026 per the public record · Verification required, no certification date estimated. Contested on June 3, 2025, then formal settlement on February 25, 2026, per the public record. After a contest, the abatement date is set by the final order or the formal settlement agreement (29 CFR 1903.19(b)(2)(ii)), so check the date against that document. The abatement date in the public record is October 1, 2026.
Public record: No abatement completion recorded in the public data.
Not yet confirmed by the employer. Nothing is certified for this item.
Evidence on file: 0 files
Possible supporting evidence
Photo of the cleared or marked exit route
Page of your emergency action or fire prevention plan
Training roster
Serious item: attach documents if your citation says they are required (1903.19(d)).
Suggestions only, not a statement of what OSHA requires or will accept.
Oct 1, 2026 per the public record · Verification required, no certification date estimated. Contested on June 3, 2025, then formal settlement on February 25, 2026, per the public record. After a contest, the abatement date is set by the final order or the formal settlement agreement (29 CFR 1903.19(b)(2)(ii)), so check the date against that document. The abatement date in the public record is October 1, 2026.
Public record: No abatement completion recorded in the public data.
Not yet confirmed by the employer. Nothing is certified for this item.
Evidence on file: 0 files
Possible supporting evidence
Photo of the cleared or marked exit route
Page of your emergency action or fire prevention plan
Training roster
Serious item: attach documents if your citation says they are required (1903.19(d)).
Suggestions only, not a statement of what OSHA requires or will accept.
Oct 1, 2026 per the public record · Verification required, no certification date estimated. Contested on June 3, 2025, then formal settlement on February 25, 2026, per the public record. After a contest, the abatement date is set by the final order or the formal settlement agreement (29 CFR 1903.19(b)(2)(ii)), so check the date against that document. The abatement date in the public record is October 1, 2026.
Public record: No abatement completion recorded in the public data.
Not yet confirmed by the employer. Nothing is certified for this item.
Evidence on file: 0 files
Possible supporting evidence
Photo of the corrected condition
Repair invoice, receipt or work order
Training roster, if employees were trained
Written program or procedure page, if one was changed
Serious item: attach documents if your citation says they are required (1903.19(d)).
Suggestions only, not a statement of what OSHA requires or will accept.
Written lockout/tagout procedures · Plain-English summary, not legal advice
Procedures for controlling hazardous energy must be written down and used whenever employees service or maintain machines (a limited exception applies when a machine meets every listed condition). The procedures must clearly set out their scope, purpose, authorization, rules and the steps for shutting down, isolating, blocking and securing the machine, placing and removing locks or tags, and checking that the energy is controlled.
Oct 1, 2026 per the public record · Verification required, no certification date estimated. Contested on June 3, 2025, then formal settlement on February 25, 2026, per the public record. After a contest, the abatement date is set by the final order or the formal settlement agreement (29 CFR 1903.19(b)(2)(ii)), so check the date against that document. The abatement date in the public record is October 1, 2026.
Public record: No abatement completion recorded in the public data.
Not yet confirmed by the employer. Nothing is certified for this item.
Evidence on file: 0 files
Possible supporting evidence
Page of your written energy-control (lockout/tagout) procedure for the machine
Training roster for authorized and affected employees
Record of the periodic inspection of the procedure
Photo of the lockout points and locks or tags
Serious item: attach documents if your citation says they are required (1903.19(d)).
Suggestions only, not a statement of what OSHA requires or will accept.
Yearly inspection of lockout/tagout procedures · Plain-English summary, not legal advice
At least once a year, an authorized employee other than the ones using a procedure must inspect each energy control procedure to make sure it is being followed and to correct problems. The employer must certify each inspection in writing: the machine, the date, the employees included and who did the inspection.
Oct 1, 2026 per the public record · Verification required, no certification date estimated. Contested on June 3, 2025, then formal settlement on February 25, 2026, per the public record. After a contest, the abatement date is set by the final order or the formal settlement agreement (29 CFR 1903.19(b)(2)(ii)), so check the date against that document. The abatement date in the public record is October 1, 2026.
Public record: No abatement completion recorded in the public data.
Not yet confirmed by the employer. Nothing is certified for this item.
Evidence on file: 0 files
Possible supporting evidence
Page of your written energy-control (lockout/tagout) procedure for the machine
Training roster for authorized and affected employees
Record of the periodic inspection of the procedure
Photo of the lockout points and locks or tags
Serious item: attach documents if your citation says they are required (1903.19(d)).
Suggestions only, not a statement of what OSHA requires or will accept.
Lockout/tagout training · Plain-English summary, not legal advice
Employees must be trained so the energy control program is understood: authorized employees on recognizing and isolating hazardous energy, affected employees on the purpose and use of the procedures, and others in the area about the procedures. Retraining is required when jobs, machines or procedures change, and training must be certified in writing with each employee's name and dates.
Oct 1, 2026 per the public record · Verification required, no certification date estimated. Contested on June 3, 2025, then formal settlement on February 25, 2026, per the public record. After a contest, the abatement date is set by the final order or the formal settlement agreement (29 CFR 1903.19(b)(2)(ii)), so check the date against that document. The abatement date in the public record is October 1, 2026.
Public record: No abatement completion recorded in the public data.
Not yet confirmed by the employer. Nothing is certified for this item.
Evidence on file: 0 files
Possible supporting evidence
Page of your written energy-control (lockout/tagout) procedure for the machine
Training roster for authorized and affected employees
Record of the periodic inspection of the procedure
Photo of the lockout points and locks or tags
Serious item: attach documents if your citation says they are required (1903.19(d)).
Suggestions only, not a statement of what OSHA requires or will accept.
Other-than-serious item under 29 CFR 1910.119(j)(2)
Oct 1, 2026 per the public record · Verification required, no certification date estimated. Contested on June 3, 2025, then formal settlement on February 25, 2026, per the public record. After a contest, the abatement date is set by the final order or the formal settlement agreement (29 CFR 1903.19(b)(2)(ii)), so check the date against that document. The abatement date in the public record is October 1, 2026.
Public record: No abatement completion recorded in the public data.
Not yet confirmed by the employer. Nothing is certified for this item.
Evidence on file: 0 files
Possible supporting evidence
Photo of the corrected condition
Repair invoice, receipt or work order
Training roster, if employees were trained
Written program or procedure page, if one was changed
Suggestions only, not a statement of what OSHA requires or will accept.
Oct 1, 2026 per the public record · Verification required, no certification date estimated. Contested on June 3, 2025, then formal settlement on February 25, 2026, per the public record. After a contest, the abatement date is set by the final order or the formal settlement agreement (29 CFR 1903.19(b)(2)(ii)), so check the date against that document. The abatement date in the public record is October 1, 2026.
Public record: No abatement completion recorded in the public data.
Not yet confirmed by the employer. Nothing is certified for this item.
Evidence on file: 0 files
Possible supporting evidence
Photo of the corrected condition
Repair invoice, receipt or work order
Training roster, if employees were trained
Written program or procedure page, if one was changed
Serious item: attach documents if your citation says they are required (1903.19(d)).
Suggestions only, not a statement of what OSHA requires or will accept.
Oct 1, 2026 per the public record · Verification required, no certification date estimated. Contested on June 3, 2025, then formal settlement on February 25, 2026, per the public record. After a contest, the abatement date is set by the final order or the formal settlement agreement (29 CFR 1903.19(b)(2)(ii)), so check the date against that document. The abatement date in the public record is October 1, 2026.
Public record: No abatement completion recorded in the public data.
Not yet confirmed by the employer. Nothing is certified for this item.
Evidence on file: 0 files
Possible supporting evidence
Photo of the corrected condition
Repair invoice, receipt or work order
Training roster, if employees were trained
Written program or procedure page, if one was changed
Serious item: attach documents if your citation says they are required (1903.19(d)).
Suggestions only, not a statement of what OSHA requires or will accept.
Oct 1, 2026 per the public record · Verification required, no certification date estimated. Contested on June 3, 2025, then formal settlement on February 25, 2026, per the public record. After a contest, the abatement date is set by the final order or the formal settlement agreement (29 CFR 1903.19(b)(2)(ii)), so check the date against that document. The abatement date in the public record is October 1, 2026.
Public record: No abatement completion recorded in the public data.
Not yet confirmed by the employer. Nothing is certified for this item.
Evidence on file: 0 files
Possible supporting evidence
Photo of the corrected condition
Repair invoice, receipt or work order
Training roster, if employees were trained
Written program or procedure page, if one was changed
Serious item: attach documents if your citation says they are required (1903.19(d)).
Suggestions only, not a statement of what OSHA requires or will accept.
3. Employee posting
Employee posting
Notice to employees: abatement certification
Prepared with CiteClock from the employer's certification. This is not an official OSHA-issued form.
STONER, INC. will certify to the Occupational Safety and Health Administration that the conditions cited in inspection 1787199 and listed below have been corrected. A copy of the certification is available from the employer on request.
Each item below is listed on the final notice once you confirm it.
Post this notice near the place where each violation occurred, or where affected employees will readily see it, at the same time as or before the certification is sent to OSHA, for 3 working days (29 CFR 1903.19(g)).
Posted on
Removed on
Posted by
4. Where to send it
Where to send this
OSHA Harrisburg Area Office
Identified from the office code in the public record (0316700). Send it to the address printed on your citation. OSHA office directory
Keep a copy of everything you send and the date you sent it.
Still needed from you
Your confirmation that all 13 items have been corrected, with the date and how
A check of your citation for the item the public record shows as corrected during the inspection. If the citation notes it, mark it: no certification is needed for that item (29 CFR 1903.19(c)(2))
Verification of 12 abatement dates against your citation, settlement or final order: the public record does not settle them (see each item)
The name and title of the person signing
Signature of the employer or an authorized representative
Abatement dates are shown per the public record. If a settlement, petition or informal agreement changed your dates or items, use those.
Certification is generally due within 10 calendar days after each abatement date (29 CFR 1903.19(c)).
No certification date is estimated for an item the public record shows as contested, settled or otherwise changed, or for a record not confirmed as Federal OSHA. Those items say "Verification required": check them against your citation, settlement agreement or final order.
No certification is required for an item your citation notes as corrected during the inspection (29 CFR 1903.19(c)(2)). The public data may say so too, but your citation is what counts.
Only certify items that are actually corrected. Knowingly false statements in documents required by the OSH Act are a federal offense (29 U.S.C. 666(g)).
The evidence ideas are suggestions, not a statement of what OSHA requires or will accept for a particular item.
29 CFR 1903.19 on eCFR · Independent software. Not affiliated with OSHA. Not legal advice.