8100 W. FLORIST AVENUE, MILWAUKEE, WI 53218 · OSHA inspection 1885728 · citation issued Sep 3, 2026 · prepared Sunday, November 22, 2026
Independent software. Not affiliated with OSHA. Not legal advice. Prepared from the public OSHA enforcement record for the employer to review, complete and sign. Not a filing, not legal advice and not a statement of what OSHA will accept.
1. Certification letter
Abatement certification · draft
To: Area Director, OSHA Milwaukee Area Office Address: as printed on your citation
MAJIC PLASTICS, INC. 8100 W. FLORIST AVENUE, MILWAUKEE, WI 53218
The hazards referenced in Inspection Number 1885728 for the violations identified below were corrected as follows:
Citation 1, Item 1a was corrected on date to be entered by: method to be enteredAwaiting your confirmation · not certified
Citation 1, Item 1b was corrected on date to be entered by: method to be enteredAwaiting your confirmation · not certified
Citation 1, Item 2 was corrected on date to be entered by: method to be enteredAwaiting your confirmation · not certified
Citation 2, Item 1 was corrected on date to be entered by: method to be enteredAwaiting your confirmation · not certified
Citation 2, Item 2 was corrected on date to be entered by: method to be enteredAwaiting your confirmation · not certified
Citation 2, Item 3 was corrected on date to be entered by: method to be enteredAwaiting your confirmation · not certified
Citation 2, Item 4 was corrected on date to be entered by: method to be enteredAwaiting your confirmation · not certified
Citation 2, Item 5 was corrected on date to be entered by: method to be enteredAwaiting your confirmation · not certified
Citation 2, Item 6 was corrected on date to be entered by: method to be enteredAwaiting your confirmation · not certified
I attest that the information contained in this document is accurate and that the affected employees and their representatives have been informed of the abatement.
Signature
Typed or printed name
Title
Date
Signed by the employer or an authorized representative. CiteClock never signs or certifies for you.
Written lockout/tagout procedures · Plain-English summary, not legal advice
Procedures for controlling hazardous energy must be written down and used whenever employees service or maintain machines (a limited exception applies when a machine meets every listed condition). The procedures must clearly set out their scope, purpose, authorization, rules and the steps for shutting down, isolating, blocking and securing the machine, placing and removing locks or tags, and checking that the energy is controlled.
Oct 7, 2026 per the public record · Verification required, no certification date estimated. Informal settlement on September 22, 2026, per the public record. A settlement or a petition to modify the abatement date can change the date and what has to be certified (29 CFR 1903.19(b)(2)(i)), so check the date against that document. The abatement date in the public record is October 7, 2026.
Public record: Abatement completion recorded in the public data.
Not yet confirmed by the employer. Nothing is certified for this item.
Evidence on file: 0 files
Possible supporting evidence
Page of your written energy-control (lockout/tagout) procedure for the machine
Training roster for authorized and affected employees
Record of the periodic inspection of the procedure
Photo of the lockout points and locks or tags
Serious item: attach documents if your citation says they are required (1903.19(d)).
Suggestions only, not a statement of what OSHA requires or will accept.
Yearly inspection of lockout/tagout procedures · Plain-English summary, not legal advice
At least once a year, an authorized employee other than the ones using a procedure must inspect each energy control procedure to make sure it is being followed and to correct problems. The employer must certify each inspection in writing: the machine, the date, the employees included and who did the inspection.
Oct 7, 2026 per the public record · Verification required, no certification date estimated. Informal settlement on September 22, 2026, per the public record. A settlement or a petition to modify the abatement date can change the date and what has to be certified (29 CFR 1903.19(b)(2)(i)), so check the date against that document. The abatement date in the public record is October 7, 2026.
Public record: Abatement completion recorded in the public data.
Not yet confirmed by the employer. Nothing is certified for this item.
Evidence on file: 0 files
Possible supporting evidence
Page of your written energy-control (lockout/tagout) procedure for the machine
Training roster for authorized and affected employees
Record of the periodic inspection of the procedure
Photo of the lockout points and locks or tags
Serious item: attach documents if your citation says they are required (1903.19(d)).
Suggestions only, not a statement of what OSHA requires or will accept.
Sep 30, 2026 per the public record · Verification required, no certification date estimated. Informal settlement on September 22, 2026, per the public record. A settlement or a petition to modify the abatement date can change the date and what has to be certified (29 CFR 1903.19(b)(2)(i)), so check the date against that document. The abatement date in the public record is September 30, 2026.
Public record: Abatement completion recorded in the public data.
Not yet confirmed by the employer. Nothing is certified for this item.
Evidence on file: 0 files
Possible supporting evidence
Photo of the corrected electrical condition (covers, cords, panel access)
Electrician's invoice or work order
Training roster if employees were retrained
Serious item: attach documents if your citation says they are required (1903.19(d)).
Suggestions only, not a statement of what OSHA requires or will accept.
Hearing conservation program · Plain-English summary, not legal advice
When employee noise exposure reaches or exceeds an 8-hour time-weighted average of 85 decibels (A-weighted), or a 50 percent dose, the employer must run a continuing, effective hearing conservation program as described in paragraphs (c) through (o) of the standard, including monitoring, audiometric testing, hearing protectors, training and records.
Oct 9, 2026 per the public record · Verification required, no certification date estimated. Informal settlement on September 22, 2026, per the public record. A settlement or a petition to modify the abatement date can change the date and what has to be certified (29 CFR 1903.19(b)(2)(i)), so check the date against that document. The abatement date in the public record is October 9, 2026.
Public record: Abatement completion recorded in the public data.
Not yet confirmed by the employer. Nothing is certified for this item.
Evidence on file: 0 files
Possible supporting evidence
Noise monitoring results
Page of your hearing conservation program
Audiometric testing schedule (no individual results)
Training roster
Suggestions only, not a statement of what OSHA requires or will accept.
Other-than-serious item under 29 CFR 1910.95(g)(6)
Oct 9, 2026 per the public record · Verification required, no certification date estimated. Informal settlement on September 22, 2026, per the public record. A settlement or a petition to modify the abatement date can change the date and what has to be certified (29 CFR 1903.19(b)(2)(i)), so check the date against that document. The abatement date in the public record is October 9, 2026.
Public record: Abatement completion recorded in the public data.
Not yet confirmed by the employer. Nothing is certified for this item.
Evidence on file: 0 files
Possible supporting evidence
Noise monitoring results
Page of your hearing conservation program
Audiometric testing schedule (no individual results)
Training roster
Suggestions only, not a statement of what OSHA requires or will accept.
Other-than-serious item under 29 CFR 1910.95(k)(2)
Oct 9, 2026 per the public record · Verification required, no certification date estimated. Informal settlement on September 22, 2026, per the public record. A settlement or a petition to modify the abatement date can change the date and what has to be certified (29 CFR 1903.19(b)(2)(i)), so check the date against that document. The abatement date in the public record is October 9, 2026.
Public record: Abatement completion recorded in the public data.
Not yet confirmed by the employer. Nothing is certified for this item.
Evidence on file: 0 files
Possible supporting evidence
Noise monitoring results
Page of your hearing conservation program
Audiometric testing schedule (no individual results)
Training roster
Suggestions only, not a statement of what OSHA requires or will accept.
Written certification of the PPE hazard assessment · Plain-English summary, not legal advice
The hazard assessment must be confirmed by a written certification that names the workplace evaluated, the person certifying it and the date(s) of the assessment, and identifies the document as a certification of hazard assessment.
Sep 16, 2026 per the public record · Verification required, no certification date estimated. Informal settlement on September 22, 2026, per the public record. A settlement or a petition to modify the abatement date can change the date and what has to be certified (29 CFR 1903.19(b)(2)(i)), so check the date against that document. The abatement date in the public record is September 16, 2026.
Public record: Abatement completion recorded in the public data.
Not yet confirmed by the employer. Nothing is certified for this item.
Evidence on file: 0 files
Possible supporting evidence
Written PPE hazard assessment certification
Purchase record for the protective equipment
Training roster
Suggestions only, not a statement of what OSHA requires or will accept.
Other-than-serious item under 29 CFR 1910.141(d)(2)(ii)
Verification required. No abatement date in the public record. Use the date on your citation.
Public record: Recorded in the public data as corrected during the inspection.
Not yet confirmed by the employer. Nothing is certified for this item.
The public record shows this item as corrected during the inspection. If your citation notes that, no certification is needed for it (29 CFR 1903.19(c)(2)).
Evidence on file: 0 files
Possible supporting evidence
Photo of the corrected first-aid or sanitation provision
Purchase record
Inspection record
Suggestions only, not a statement of what OSHA requires or will accept.
Other-than-serious item under 29 CFR 1910.305(g)(2)(ii)
Sep 30, 2026 per the public record · Verification required, no certification date estimated. Informal settlement on September 22, 2026, per the public record. A settlement or a petition to modify the abatement date can change the date and what has to be certified (29 CFR 1903.19(b)(2)(i)), so check the date against that document. The abatement date in the public record is September 30, 2026.
Public record: Abatement completion recorded in the public data.
Not yet confirmed by the employer. Nothing is certified for this item.
Evidence on file: 0 files
Possible supporting evidence
Photo of the corrected electrical condition (covers, cords, panel access)
Electrician's invoice or work order
Training roster if employees were retrained
Suggestions only, not a statement of what OSHA requires or will accept.
3. Employee posting
Employee posting
Notice to employees: abatement certification
Prepared with CiteClock from the employer's certification. This is not an official OSHA-issued form.
MAJIC PLASTICS, INC. will certify to the Occupational Safety and Health Administration that the conditions cited in inspection 1885728 and listed below have been corrected. A copy of the certification is available from the employer on request.
Each item below is listed on the final notice once you confirm it.
Citation 1, Item 1a (29 CFR 1910.147(c)(4)(i))
Citation 1, Item 1b (29 CFR 1910.147(c)(6)(i))
Citation 1, Item 2 (29 CFR 1910.303(b)(2))
Citation 2, Item 1 (29 CFR 1910.95(c)(1))
Citation 2, Item 2 (29 CFR 1910.95(g)(6))
Citation 2, Item 3 (29 CFR 1910.95(k)(2))
Citation 2, Item 4 (29 CFR 1910.132(d)(2))
Citation 2, Item 5 (29 CFR 1910.141(d)(2)(ii))
Citation 2, Item 6 (29 CFR 1910.305(g)(2)(ii))
Post this notice near the place where each violation occurred, or where affected employees will readily see it, at the same time as or before the certification is sent to OSHA, for 3 working days (29 CFR 1903.19(g)).
Posted on
Removed on
Posted by
4. Where to send it
Where to send this
OSHA Milwaukee Area Office
Identified from the office code in the public record (0523400). Send it to the address printed on your citation. OSHA office directory
Keep a copy of everything you send and the date you sent it.
Still needed from you
Your confirmation that all 9 items have been corrected, with the date and how
A check of your citation for the item the public record shows as corrected during the inspection. If the citation notes it, mark it: no certification is needed for that item (29 CFR 1903.19(c)(2))
Verification of 8 abatement dates against your citation, settlement or final order: the public record does not settle them (see each item)
The name and title of the person signing
Signature of the employer or an authorized representative
Abatement dates are shown per the public record. If a settlement, petition or informal agreement changed your dates or items, use those.
Certification is generally due within 10 calendar days after each abatement date (29 CFR 1903.19(c)).
No certification date is estimated for an item the public record shows as contested, settled or otherwise changed, or for a record not confirmed as Federal OSHA. Those items say "Verification required": check them against your citation, settlement agreement or final order.
No certification is required for an item your citation notes as corrected during the inspection (29 CFR 1903.19(c)(2)). The public data may say so too, but your citation is what counts.
Only certify items that are actually corrected. Knowingly false statements in documents required by the OSH Act are a federal offense (29 U.S.C. 666(g)).
The evidence ideas are suggestions, not a statement of what OSHA requires or will accept for a particular item.
29 CFR 1903.19 on eCFR · Independent software. Not affiliated with OSHA. Not legal advice.