229 QUAKER HIGHWAY, STE 3, NORTH SMITHFIELD, RI 02896 · OSHA inspection 1889884 · citation issued Aug 14, 2026 · prepared Sunday, November 22, 2026
Independent software. Not affiliated with OSHA. Not legal advice. Prepared from the public OSHA enforcement record for the employer to review, complete and sign. Not a filing, not legal advice and not a statement of what OSHA will accept.
1. Certification letter
Abatement certification · draft
To: Area Director, OSHA Providence Area Office Address: as printed on your citation
ATLANTIC FOOTCARE, INC. 229 QUAKER HIGHWAY, STE 3, NORTH SMITHFIELD, RI 02896
The hazards referenced in Inspection Number 1889884 for the violations identified below were corrected as follows:
Citation 1, Item 1 was corrected on date to be entered by: method to be enteredAwaiting your confirmation · not certified
Citation 1, Item 2 was corrected on date to be entered by: method to be enteredAwaiting your confirmation · not certified
Citation 2, Item 1 was corrected on date to be entered by: method to be enteredAwaiting your confirmation · not certified
Citation 2, Item 2 was corrected on date to be entered by: method to be enteredAwaiting your confirmation · not certified
Citation 2, Item 3a was corrected on date to be entered by: method to be enteredAwaiting your confirmation · not certified
Citation 2, Item 3b was corrected on date to be entered by: method to be enteredAwaiting your confirmation · not certified
Citation 2, Item 4a was corrected on date to be entered by: method to be enteredAwaiting your confirmation · not certified
Citation 2, Item 4b was corrected on date to be entered by: method to be enteredAwaiting your confirmation · not certified
Citation 2, Item 5 was corrected on date to be entered by: method to be enteredAwaiting your confirmation · not certified
Citation 2, Item 6 was corrected on date to be entered by: method to be enteredAwaiting your confirmation · not certified
I attest that the information contained in this document is accurate and that the affected employees and their representatives have been informed of the abatement.
Signature
Typed or printed name
Title
Date
Signed by the employer or an authorized representative. CiteClock never signs or certifies for you.
Machine guarding · Plain-English summary, not legal advice
One or more methods of machine guarding must protect the operator and other employees in the machine area from hazards such as the point of operation, ingoing nip points, rotating parts, and flying chips and sparks. Barrier guards, two-hand tripping devices and electronic safety devices are examples.
Oct 30, 2026 per the public record · Verification required, no certification date estimated. Informal settlement on August 25, 2026, per the public record. A settlement or a petition to modify the abatement date can change the date and what has to be certified (29 CFR 1903.19(b)(2)(i)), so check the date against that document. The record's abatement date changed from September 30, 2026, as issued, to October 30, 2026.
Public record: Abatement completion recorded in the public data.
Not yet confirmed by the employer. Nothing is certified for this item.
Evidence on file: 0 files
Possible supporting evidence
Photo of the installed guard on the machine
Invoice or work order for the guard or repair
Equipment service record
Serious item: attach documents if your citation says they are required (1903.19(d)).
Suggestions only, not a statement of what OSHA requires or will accept.
Oct 30, 2026 per the public record · Verification required, no certification date estimated. Informal settlement on August 25, 2026, per the public record. A settlement or a petition to modify the abatement date can change the date and what has to be certified (29 CFR 1903.19(b)(2)(i)), so check the date against that document. The record's abatement date changed from September 30, 2026, as issued, to October 30, 2026.
Public record: Abatement completion recorded in the public data.
Not yet confirmed by the employer. Nothing is certified for this item.
Evidence on file: 0 files
Possible supporting evidence
Photo of the corrected electrical condition (covers, cords, panel access)
Electrician's invoice or work order
Training roster if employees were retrained
Serious item: attach documents if your citation says they are required (1903.19(d)).
Suggestions only, not a statement of what OSHA requires or will accept.
Sep 30, 2026 per the public record · Verification required, no certification date estimated. Informal settlement on August 25, 2026, per the public record. A settlement or a petition to modify the abatement date can change the date and what has to be certified (29 CFR 1903.19(b)(2)(i)), so check the date against that document. The abatement date in the public record is September 30, 2026.
Public record: Abatement completion recorded in the public data.
Not yet confirmed by the employer. Nothing is certified for this item.
Evidence on file: 0 files
Possible supporting evidence
Corrected OSHA 300 log page
Corrected or posted OSHA 300A summary
Record of the electronic submission if one was required
Suggestions only, not a statement of what OSHA requires or will accept.
Electronic submission of the OSHA 300A summary · Plain-English summary, not legal advice
Establishments with 20 to 249 employees in industries listed in Appendix A to subpart E, and establishments with 250 or more employees that must keep injury records, must submit the information from their OSHA Form 300A summary to OSHA electronically once a year, by March 2 of the year after the year the form covers.
Sep 30, 2026 per the public record · Verification required, no certification date estimated. Informal settlement on August 25, 2026, per the public record. A settlement or a petition to modify the abatement date can change the date and what has to be certified (29 CFR 1903.19(b)(2)(i)), so check the date against that document. The abatement date in the public record is September 30, 2026.
Public record: Abatement completion recorded in the public data.
Not yet confirmed by the employer. Nothing is certified for this item.
Evidence on file: 0 files
Possible supporting evidence
Corrected OSHA 300 log page
Corrected or posted OSHA 300A summary
Record of the electronic submission if one was required
Suggestions only, not a statement of what OSHA requires or will accept.
Yearly inspection of lockout/tagout procedures · Plain-English summary, not legal advice
At least once a year, an authorized employee other than the ones using a procedure must inspect each energy control procedure to make sure it is being followed and to correct problems. The employer must certify each inspection in writing: the machine, the date, the employees included and who did the inspection.
Sep 30, 2026 per the public record · Verification required, no certification date estimated. Informal settlement on August 25, 2026, per the public record. A settlement or a petition to modify the abatement date can change the date and what has to be certified (29 CFR 1903.19(b)(2)(i)), so check the date against that document. The abatement date in the public record is September 30, 2026.
Public record: Abatement completion recorded in the public data.
Not yet confirmed by the employer. Nothing is certified for this item.
Evidence on file: 0 files
Possible supporting evidence
Page of your written energy-control (lockout/tagout) procedure for the machine
Training roster for authorized and affected employees
Record of the periodic inspection of the procedure
Photo of the lockout points and locks or tags
Suggestions only, not a statement of what OSHA requires or will accept.
Lockout/tagout training · Plain-English summary, not legal advice
Employees must be trained so the energy control program is understood: authorized employees on recognizing and isolating hazardous energy, affected employees on the purpose and use of the procedures, and others in the area about the procedures. Retraining is required when jobs, machines or procedures change, and training must be certified in writing with each employee's name and dates.
Sep 30, 2026 per the public record · Verification required, no certification date estimated. Informal settlement on August 25, 2026, per the public record. A settlement or a petition to modify the abatement date can change the date and what has to be certified (29 CFR 1903.19(b)(2)(i)), so check the date against that document. The abatement date in the public record is September 30, 2026.
Public record: Abatement completion recorded in the public data.
Not yet confirmed by the employer. Nothing is certified for this item.
Evidence on file: 0 files
Possible supporting evidence
Page of your written energy-control (lockout/tagout) procedure for the machine
Training roster for authorized and affected employees
Record of the periodic inspection of the procedure
Photo of the lockout points and locks or tags
Suggestions only, not a statement of what OSHA requires or will accept.
Other-than-serious item under 29 CFR 1910.178(l)(4)(iii)
Sep 30, 2026 per the public record · Verification required, no certification date estimated. Informal settlement on August 25, 2026, per the public record. A settlement or a petition to modify the abatement date can change the date and what has to be certified (29 CFR 1903.19(b)(2)(i)), so check the date against that document. The abatement date in the public record is September 30, 2026.
Public record: Abatement completion recorded in the public data.
Not yet confirmed by the employer. Nothing is certified for this item.
Evidence on file: 0 files
Possible supporting evidence
Operator training and evaluation certificates
Daily truck inspection checklist
Repair invoice if the truck was fixed or taken out of service
Suggestions only, not a statement of what OSHA requires or will accept.
Other-than-serious item under 29 CFR 1910.178(p)(1)
Sep 30, 2026 per the public record · Verification required, no certification date estimated. Informal settlement on August 25, 2026, per the public record. A settlement or a petition to modify the abatement date can change the date and what has to be certified (29 CFR 1903.19(b)(2)(i)), so check the date against that document. The abatement date in the public record is September 30, 2026.
Public record: Abatement completion recorded in the public data.
Not yet confirmed by the employer. Nothing is certified for this item.
Evidence on file: 0 files
Possible supporting evidence
Operator training and evaluation certificates
Daily truck inspection checklist
Repair invoice if the truck was fixed or taken out of service
Suggestions only, not a statement of what OSHA requires or will accept.
Other-than-serious item under 29 CFR 1910.303(b)(2)
Sep 30, 2026 per the public record · Verification required, no certification date estimated. Informal settlement on August 25, 2026, per the public record. A settlement or a petition to modify the abatement date can change the date and what has to be certified (29 CFR 1903.19(b)(2)(i)), so check the date against that document. The abatement date in the public record is September 30, 2026.
Public record: Abatement completion recorded in the public data.
Not yet confirmed by the employer. Nothing is certified for this item.
Evidence on file: 0 files
Possible supporting evidence
Photo of the corrected electrical condition (covers, cords, panel access)
Electrician's invoice or work order
Training roster if employees were retrained
Suggestions only, not a statement of what OSHA requires or will accept.
Other-than-serious item under 29 CFR 1910.305(g)(1)(iv)(A)
Sep 30, 2026 per the public record · Verification required, no certification date estimated. Informal settlement on August 25, 2026, per the public record. A settlement or a petition to modify the abatement date can change the date and what has to be certified (29 CFR 1903.19(b)(2)(i)), so check the date against that document. The abatement date in the public record is September 30, 2026.
Public record: Abatement completion recorded in the public data.
Not yet confirmed by the employer. Nothing is certified for this item.
Evidence on file: 0 files
Possible supporting evidence
Photo of the corrected electrical condition (covers, cords, panel access)
Electrician's invoice or work order
Training roster if employees were retrained
Suggestions only, not a statement of what OSHA requires or will accept.
3. Employee posting
Employee posting
Notice to employees: abatement certification
Prepared with CiteClock from the employer's certification. This is not an official OSHA-issued form.
ATLANTIC FOOTCARE, INC. will certify to the Occupational Safety and Health Administration that the conditions cited in inspection 1889884 and listed below have been corrected. A copy of the certification is available from the employer on request.
Each item below is listed on the final notice once you confirm it.
Citation 1, Item 1 (29 CFR 1910.212(a)(1))
Citation 1, Item 2 (29 CFR 1910.303(g)(2)(i))
Citation 2, Item 1 (29 CFR 1904.33(a))
Citation 2, Item 2 (29 CFR 1904.41(a)(1)(i))
Citation 2, Item 3a (29 CFR 1910.147(c)(6)(i))
Citation 2, Item 3b (29 CFR 1910.147(c)(7)(i)(B))
Citation 2, Item 4a (29 CFR 1910.178(l)(4)(iii))
Citation 2, Item 4b (29 CFR 1910.178(p)(1))
Citation 2, Item 5 (29 CFR 1910.303(b)(2))
Citation 2, Item 6 (29 CFR 1910.305(g)(1)(iv)(A))
Post this notice near the place where each violation occurred, or where affected employees will readily see it, at the same time as or before the certification is sent to OSHA, for 3 working days (29 CFR 1903.19(g)).
Posted on
Removed on
Posted by
4. Where to send it
Where to send this
OSHA Providence Area Office
Identified from the office code in the public record (0112300). Send it to the address printed on your citation. OSHA office directory
Keep a copy of everything you send and the date you sent it.
Still needed from you
Your confirmation that all 10 items have been corrected, with the date and how
Verification of 10 abatement dates against your citation, settlement or final order: the public record does not settle them (see each item)
The name and title of the person signing
Signature of the employer or an authorized representative
Abatement dates are shown per the public record. If a settlement, petition or informal agreement changed your dates or items, use those.
Certification is generally due within 10 calendar days after each abatement date (29 CFR 1903.19(c)).
No certification date is estimated for an item the public record shows as contested, settled or otherwise changed, or for a record not confirmed as Federal OSHA. Those items say "Verification required": check them against your citation, settlement agreement or final order.
No certification is required for an item your citation notes as corrected during the inspection (29 CFR 1903.19(c)(2)). The public data may say so too, but your citation is what counts.
Only certify items that are actually corrected. Knowingly false statements in documents required by the OSH Act are a federal offense (29 U.S.C. 666(g)).
The evidence ideas are suggestions, not a statement of what OSHA requires or will accept for a particular item.
29 CFR 1903.19 on eCFR · Independent software. Not affiliated with OSHA. Not legal advice.