Skip to content

Abatement packet · DRAFT — PREVIEW

U.S. POSTAL SERVICE

25 DORCHESTER AVENUE ATTN: SABIR SALIH, BOSTON, MA 02205 · OSHA inspection 1903430 · citation issued Sep 22, 2026 · prepared Sunday, November 22, 2026

Independent software. Not affiliated with OSHA. Not legal advice. Prepared from the public OSHA enforcement record for the employer to review, complete and sign. Not a filing, not legal advice and not a statement of what OSHA will accept.

1. Certification letter

Abatement certification · draft

To: Area Director, OSHA Providence Area Office
Address: as printed on your citation

U.S. POSTAL SERVICE
25 DORCHESTER AVENUE ATTN: SABIR SALIH, BOSTON, MA 02205

The hazards referenced in Inspection Number 1903430 for the violations identified below were corrected as follows:

  1. Citation 1, Item 1a was corrected on date to be entered by: method to be entered Awaiting your confirmation · not certified
  2. Citation 1, Item 1b was corrected on date to be entered by: method to be entered Awaiting your confirmation · not certified

I attest that the information contained in this document is accurate and that the affected employees and their representatives have been informed of the abatement.

Signature
Typed or printed name
Title
Date

Signed by the employer or an authorized representative. CiteClock never signs or certifies for you.

2. Item-by-item closeout

Citation 1 · Item 1a · 29 CFR 1910.147(c)(4)(i) · Serious

Written lockout/tagout procedures · Plain-English summary, not legal advice

Procedures for controlling hazardous energy must be written down and used whenever employees service or maintain machines (a limited exception applies when a machine meets every listed condition). The procedures must clearly set out their scope, purpose, authorization, rules and the steps for shutting down, isolating, blocking and securing the machine, placing and removing locks or tags, and checking that the energy is controlled.

Official text

Nov 6, 2026 per the public record · Verification required, no certification date estimated. Contested on October 8, 2026 per the public record, with no final order recorded since. While an item is contested in good faith, its abatement period does not run until the final order (OSH Act section 10(b)), so CiteClock does not estimate a certification date for it. If only the penalty was contested, the citation's abatement date may still apply: check with your advisor. The abatement date in the public record is November 6, 2026.

Public record: No abatement completion recorded in the public data.

Not yet confirmed by the employer. Nothing is certified for this item.

Evidence on file: 0 files

Possible supporting evidence

  • Page of your written energy-control (lockout/tagout) procedure for the machine
  • Training roster for authorized and affected employees
  • Record of the periodic inspection of the procedure
  • Photo of the lockout points and locks or tags

Serious item: attach documents if your citation says they are required (1903.19(d)).

Suggestions only, not a statement of what OSHA requires or will accept.

Citation 1 · Item 1b · 29 CFR 1910.147(d) · Serious

Serious item under 29 CFR 1910.147(d)

Nov 6, 2026 per the public record · Verification required, no certification date estimated. Contested on October 8, 2026 per the public record, with no final order recorded since. While an item is contested in good faith, its abatement period does not run until the final order (OSH Act section 10(b)), so CiteClock does not estimate a certification date for it. If only the penalty was contested, the citation's abatement date may still apply: check with your advisor. The abatement date in the public record is November 6, 2026.

Public record: No abatement completion recorded in the public data.

Not yet confirmed by the employer. Nothing is certified for this item.

Evidence on file: 0 files

Possible supporting evidence

  • Page of your written energy-control (lockout/tagout) procedure for the machine
  • Training roster for authorized and affected employees
  • Record of the periodic inspection of the procedure
  • Photo of the lockout points and locks or tags

Serious item: attach documents if your citation says they are required (1903.19(d)).

Suggestions only, not a statement of what OSHA requires or will accept.

3. Employee posting

Employee posting

Notice to employees: abatement certification

Prepared with CiteClock from the employer's certification. This is not an official OSHA-issued form.

U.S. POSTAL SERVICE will certify to the Occupational Safety and Health Administration that the conditions cited in inspection 1903430 and listed below have been corrected. A copy of the certification is available from the employer on request.

Each item below is listed on the final notice once you confirm it.

  • Citation 1, Item 1a (29 CFR 1910.147(c)(4)(i))
  • Citation 1, Item 1b (29 CFR 1910.147(d))

Post this notice near the place where each violation occurred, or where affected employees will readily see it, at the same time as or before the certification is sent to OSHA, for 3 working days (29 CFR 1903.19(g)).

Posted on
Removed on
Posted by

4. Where to send it

Where to send this

OSHA Providence Area Office

Identified from the office code in the public record (0112300). Send it to the address printed on your citation. OSHA office directory

Keep a copy of everything you send and the date you sent it.

Still needed from you

  • Your confirmation that all 2 items have been corrected, with the date and how
  • Verification of 2 abatement dates against your citation, settlement or final order: the public record does not settle them (see each item)
  • The name and title of the person signing
  • Signature of the employer or an authorized representative
  • Abatement dates are shown per the public record. If a settlement, petition or informal agreement changed your dates or items, use those.
  • Certification is generally due within 10 calendar days after each abatement date (29 CFR 1903.19(c)).
  • No certification date is estimated for an item the public record shows as contested, settled or otherwise changed, or for a record not confirmed as Federal OSHA. Those items say "Verification required": check them against your citation, settlement agreement or final order.
  • No certification is required for an item your citation notes as corrected during the inspection (29 CFR 1903.19(c)(2)). The public data may say so too, but your citation is what counts.
  • Only certify items that are actually corrected. Knowingly false statements in documents required by the OSH Act are a federal offense (29 U.S.C. 666(g)).
  • The evidence ideas are suggestions, not a statement of what OSHA requires or will accept for a particular item.
  • 29 CFR 1903.19 on eCFR · Independent software. Not affiliated with OSHA. Not legal advice.