Skip to content

Abatement packet · DRAFT — PREVIEW

MAZCON, A KURTZ BROS. COMPANY, LLC

3240 AVONDALE MILL ROAD, MACON, GA 31216 · OSHA inspection 1894669 · citation issued Oct 14, 2026 · prepared Saturday, November 21, 2026

Independent software. Not affiliated with OSHA. Not legal advice. Prepared from the public OSHA enforcement record for the employer to review, complete and sign. Not a filing, not legal advice and not a statement of what OSHA will accept.

1. Certification letter

Abatement certification · draft

To: Area Director, OSHA Atlanta East Area Office
Address: as printed on your citation

MAZCON, A KURTZ BROS. COMPANY, LLC
3240 AVONDALE MILL ROAD, MACON, GA 31216

The hazards referenced in Inspection Number 1894669 for the violations identified below were corrected as follows:

  1. Citation 1, Item 1 was corrected on date to be entered by: method to be entered Awaiting your confirmation · not certified
  2. Citation 1, Item 2 was corrected on date to be entered by: method to be entered Awaiting your confirmation · not certified
  3. Citation 1, Item 3a was corrected on date to be entered by: method to be entered Awaiting your confirmation · not certified
  4. Citation 1, Item 3b was corrected on date to be entered by: method to be entered Awaiting your confirmation · not certified
  5. Citation 1, Item 3c was corrected on date to be entered by: method to be entered Awaiting your confirmation · not certified
  6. Citation 1, Item 5 was corrected on date to be entered by: method to be entered Awaiting your confirmation · not certified
  7. Citation 1, Item 6a was corrected on date to be entered by: method to be entered Awaiting your confirmation · not certified
  8. Citation 1, Item 6b was corrected on date to be entered by: method to be entered Awaiting your confirmation · not certified
  9. Citation 1, Item 6c was corrected on date to be entered by: method to be entered Awaiting your confirmation · not certified
  10. Citation 1, Item 7a was corrected on date to be entered by: method to be entered Awaiting your confirmation · not certified
  11. Citation 1, Item 7b was corrected on date to be entered by: method to be entered Awaiting your confirmation · not certified
  12. Citation 1, Item 8 was corrected on date to be entered by: method to be entered Awaiting your confirmation · not certified
  13. Citation 1, Item 9 was corrected on date to be entered by: method to be entered Awaiting your confirmation · not certified
  14. Citation 2, Item 1 was corrected on date to be entered by: method to be entered Awaiting your confirmation · not certified

I attest that the information contained in this document is accurate and that the affected employees and their representatives have been informed of the abatement.

Signature
Typed or printed name
Title
Date

Signed by the employer or an authorized representative. CiteClock never signs or certifies for you.

2. Item-by-item closeout

Citation 1 · Item 1 · 29 CFR 1910.22(a)(1) · Serious

Clean and orderly work areas · Plain-English summary, not legal advice

All places of employment, passageways, storerooms, service rooms and walking-working surfaces must be kept clean, orderly and sanitary.

Official text

Dec 30, 2026 per the public record · Verification required, no certification date estimated. Informal settlement on November 9, 2026, per the public record. A settlement or a petition to modify the abatement date can change the date and what has to be certified (29 CFR 1903.19(b)(2)(i)), so check the date against that document. The record's abatement date changed from November 9, 2026, as issued, to December 30, 2026.

Public record: No abatement completion recorded in the public data.

Not yet confirmed by the employer. Nothing is certified for this item.

Evidence on file: 0 files

Possible supporting evidence

  • Photo of the corrected walking-working surface, railing or ladder
  • Invoice for repair or replacement
  • Inspection record

Serious item: attach documents if your citation says they are required (1903.19(d)).

Suggestions only, not a statement of what OSHA requires or will accept.

Citation 1 · Item 2 · 29 CFR 1910.138(a) · Serious

Serious item under 29 CFR 1910.138(a)

Dec 9, 2026 per the public record · Verification required, no certification date estimated. Informal settlement on November 9, 2026, per the public record. A settlement or a petition to modify the abatement date can change the date and what has to be certified (29 CFR 1903.19(b)(2)(i)), so check the date against that document. The record's abatement date changed from November 9, 2026, as issued, to December 9, 2026.

Public record: No abatement completion recorded in the public data.

Not yet confirmed by the employer. Nothing is certified for this item.

Evidence on file: 0 files

Possible supporting evidence

  • Written PPE hazard assessment certification
  • Purchase record for the protective equipment
  • Training roster

Serious item: attach documents if your citation says they are required (1903.19(d)).

Suggestions only, not a statement of what OSHA requires or will accept.

Citation 1 · Item 3a · 29 CFR 1910.147(c)(4)(i) · Serious

Written lockout/tagout procedures · Plain-English summary, not legal advice

Procedures for controlling hazardous energy must be written down and used whenever employees service or maintain machines (a limited exception applies when a machine meets every listed condition). The procedures must clearly set out their scope, purpose, authorization, rules and the steps for shutting down, isolating, blocking and securing the machine, placing and removing locks or tags, and checking that the energy is controlled.

Official text

Dec 30, 2026 per the public record · Verification required, no certification date estimated. Informal settlement on November 9, 2026, per the public record. A settlement or a petition to modify the abatement date can change the date and what has to be certified (29 CFR 1903.19(b)(2)(i)), so check the date against that document. The record's abatement date changed from November 9, 2026, as issued, to December 30, 2026.

Public record: No abatement completion recorded in the public data.

Not yet confirmed by the employer. Nothing is certified for this item.

Evidence on file: 0 files

Possible supporting evidence

  • Page of your written energy-control (lockout/tagout) procedure for the machine
  • Training roster for authorized and affected employees
  • Record of the periodic inspection of the procedure
  • Photo of the lockout points and locks or tags

Serious item: attach documents if your citation says they are required (1903.19(d)).

Suggestions only, not a statement of what OSHA requires or will accept.

Citation 1 · Item 3b · 29 CFR 1910.147(c)(7)(i) · Serious

Lockout/tagout training · Plain-English summary, not legal advice

Employees must be trained so the energy control program is understood: authorized employees on recognizing and isolating hazardous energy, affected employees on the purpose and use of the procedures, and others in the area about the procedures. Retraining is required when jobs, machines or procedures change, and training must be certified in writing with each employee's name and dates.

Official text

Verification required. No abatement date in the public record. Use the date on your citation.

Public record: Recorded in the public data as corrected during the inspection.

Not yet confirmed by the employer. Nothing is certified for this item.

The public record shows this item as corrected during the inspection. If your citation notes that, no certification is needed for it (29 CFR 1903.19(c)(2)).

Evidence on file: 0 files

Possible supporting evidence

  • Page of your written energy-control (lockout/tagout) procedure for the machine
  • Training roster for authorized and affected employees
  • Record of the periodic inspection of the procedure
  • Photo of the lockout points and locks or tags

Serious item: attach documents if your citation says they are required (1903.19(d)).

Suggestions only, not a statement of what OSHA requires or will accept.

Citation 1 · Item 3c · 29 CFR 1910.147(f)(3)(ii)(D) · Serious

Serious item under 29 CFR 1910.147(f)(3)(ii)(D)

Verification required. No abatement date in the public record. Use the date on your citation.

Public record: Recorded in the public data as corrected during the inspection.

Not yet confirmed by the employer. Nothing is certified for this item.

The public record shows this item as corrected during the inspection. If your citation notes that, no certification is needed for it (29 CFR 1903.19(c)(2)).

Evidence on file: 0 files

Possible supporting evidence

  • Page of your written energy-control (lockout/tagout) procedure for the machine
  • Training roster for authorized and affected employees
  • Record of the periodic inspection of the procedure
  • Photo of the lockout points and locks or tags

Serious item: attach documents if your citation says they are required (1903.19(d)).

Suggestions only, not a statement of what OSHA requires or will accept.

Citation 1 · Item 5 · 29 CFR 1910.178(l)(1)(ii) · Serious

Serious item under 29 CFR 1910.178(l)(1)(ii)

Verification required. No abatement date in the public record. Use the date on your citation.

Public record: Recorded in the public data as corrected during the inspection.

Not yet confirmed by the employer. Nothing is certified for this item.

The public record shows this item as corrected during the inspection. If your citation notes that, no certification is needed for it (29 CFR 1903.19(c)(2)).

Evidence on file: 0 files

Possible supporting evidence

  • Operator training and evaluation certificates
  • Daily truck inspection checklist
  • Repair invoice if the truck was fixed or taken out of service

Serious item: attach documents if your citation says they are required (1903.19(d)).

Suggestions only, not a statement of what OSHA requires or will accept.

Citation 1 · Item 6a · 29 CFR 1910.184(c)(1) · Serious

Serious item under 29 CFR 1910.184(c)(1)

Dec 30, 2026 per the public record · Verification required, no certification date estimated. Informal settlement on November 9, 2026, per the public record. A settlement or a petition to modify the abatement date can change the date and what has to be certified (29 CFR 1903.19(b)(2)(i)), so check the date against that document. The record's abatement date changed from November 9, 2026, as issued, to December 30, 2026.

Public record: Abatement completion recorded in the public data.

Not yet confirmed by the employer. Nothing is certified for this item.

Evidence on file: 0 files

Possible supporting evidence

  • Photo of the corrected condition
  • Repair invoice, receipt or work order
  • Training roster, if employees were trained
  • Written program or procedure page, if one was changed

Serious item: attach documents if your citation says they are required (1903.19(d)).

Suggestions only, not a statement of what OSHA requires or will accept.

Citation 1 · Item 6b · 29 CFR 1910.184(c)(2) · Serious

Serious item under 29 CFR 1910.184(c)(2)

Dec 30, 2026 per the public record · Verification required, no certification date estimated. Informal settlement on November 9, 2026, per the public record. A settlement or a petition to modify the abatement date can change the date and what has to be certified (29 CFR 1903.19(b)(2)(i)), so check the date against that document. The record's abatement date changed from November 9, 2026, as issued, to December 30, 2026.

Public record: No abatement completion recorded in the public data.

Not yet confirmed by the employer. Nothing is certified for this item.

Evidence on file: 0 files

Possible supporting evidence

  • Photo of the corrected condition
  • Repair invoice, receipt or work order
  • Training roster, if employees were trained
  • Written program or procedure page, if one was changed

Serious item: attach documents if your citation says they are required (1903.19(d)).

Suggestions only, not a statement of what OSHA requires or will accept.

Citation 1 · Item 6c · 29 CFR 1910.184(d) · Serious

Serious item under 29 CFR 1910.184(d)

Dec 30, 2026 per the public record · Verification required, no certification date estimated. Informal settlement on November 9, 2026, per the public record. A settlement or a petition to modify the abatement date can change the date and what has to be certified (29 CFR 1903.19(b)(2)(i)), so check the date against that document. The record's abatement date changed from November 3, 2026, as issued, to December 30, 2026.

Public record: No abatement completion recorded in the public data.

Not yet confirmed by the employer. Nothing is certified for this item.

Evidence on file: 0 files

Possible supporting evidence

  • Photo of the corrected condition
  • Repair invoice, receipt or work order
  • Training roster, if employees were trained
  • Written program or procedure page, if one was changed

Serious item: attach documents if your citation says they are required (1903.19(d)).

Suggestions only, not a statement of what OSHA requires or will accept.

Citation 1 · Item 7a · 29 CFR 1910.212(a)(1) · Serious

Machine guarding · Plain-English summary, not legal advice

One or more methods of machine guarding must protect the operator and other employees in the machine area from hazards such as the point of operation, ingoing nip points, rotating parts, and flying chips and sparks. Barrier guards, two-hand tripping devices and electronic safety devices are examples.

Official text

Verification required. No abatement date in the public record. Use the date on your citation.

Public record: Recorded in the public data as corrected during the inspection.

Not yet confirmed by the employer. Nothing is certified for this item.

The public record shows this item as corrected during the inspection. If your citation notes that, no certification is needed for it (29 CFR 1903.19(c)(2)).

Evidence on file: 0 files

Possible supporting evidence

  • Photo of the installed guard on the machine
  • Invoice or work order for the guard or repair
  • Equipment service record

Serious item: attach documents if your citation says they are required (1903.19(d)).

Suggestions only, not a statement of what OSHA requires or will accept.

Citation 1 · Item 7b · 29 CFR 1910.212(a)(5) · Serious

Serious item under 29 CFR 1910.212(a)(5)

Verification required. No abatement date in the public record. Use the date on your citation.

Public record: Recorded in the public data as corrected during the inspection.

Not yet confirmed by the employer. Nothing is certified for this item.

The public record shows this item as corrected during the inspection. If your citation notes that, no certification is needed for it (29 CFR 1903.19(c)(2)).

Evidence on file: 0 files

Possible supporting evidence

  • Photo of the installed guard on the machine
  • Invoice or work order for the guard or repair
  • Equipment service record

Serious item: attach documents if your citation says they are required (1903.19(d)).

Suggestions only, not a statement of what OSHA requires or will accept.

Citation 1 · Item 8 · 29 CFR 1910.242(b) · Serious

Serious item under 29 CFR 1910.242(b)

Dec 30, 2026 per the public record · Verification required, no certification date estimated. Informal settlement on November 9, 2026, per the public record. A settlement or a petition to modify the abatement date can change the date and what has to be certified (29 CFR 1903.19(b)(2)(i)), so check the date against that document. The record's abatement date changed from November 9, 2026, as issued, to December 30, 2026.

Public record: Abatement completion recorded in the public data.

Not yet confirmed by the employer. Nothing is certified for this item.

Evidence on file: 0 files

Possible supporting evidence

  • Photo of the corrected condition
  • Repair invoice, receipt or work order
  • Training roster, if employees were trained
  • Written program or procedure page, if one was changed

Serious item: attach documents if your citation says they are required (1903.19(d)).

Suggestions only, not a statement of what OSHA requires or will accept.

Citation 1 · Item 9 · 29 CFR 1910.303(g)(2)(i) · Serious

Serious item under 29 CFR 1910.303(g)(2)(i)

Verification required. No abatement date in the public record. Use the date on your citation.

Public record: Recorded in the public data as corrected during the inspection.

Not yet confirmed by the employer. Nothing is certified for this item.

The public record shows this item as corrected during the inspection. If your citation notes that, no certification is needed for it (29 CFR 1903.19(c)(2)).

Evidence on file: 0 files

Possible supporting evidence

  • Photo of the corrected electrical condition (covers, cords, panel access)
  • Electrician's invoice or work order
  • Training roster if employees were retrained

Serious item: attach documents if your citation says they are required (1903.19(d)).

Suggestions only, not a statement of what OSHA requires or will accept.

Citation 2 · Item 1 · 29 CFR 1910.157(c)(1) · Other-than-serious

Other-than-serious item under 29 CFR 1910.157(c)(1)

Verification required. No abatement date in the public record. Use the date on your citation.

Public record: Recorded in the public data as corrected during the inspection.

Not yet confirmed by the employer. Nothing is certified for this item.

The public record shows this item as corrected during the inspection. If your citation notes that, no certification is needed for it (29 CFR 1903.19(c)(2)).

Evidence on file: 0 files

Possible supporting evidence

  • Photo of the inspection tag or the mounted extinguisher
  • Service record from the extinguisher vendor
  • Training roster

Suggestions only, not a statement of what OSHA requires or will accept.

3. Employee posting

Employee posting

Notice to employees: abatement certification

Prepared with CiteClock from the employer's certification. This is not an official OSHA-issued form.

MAZCON, A KURTZ BROS. COMPANY, LLC will certify to the Occupational Safety and Health Administration that the conditions cited in inspection 1894669 and listed below have been corrected. A copy of the certification is available from the employer on request.

Each item below is listed on the final notice once you confirm it.

  • Citation 1, Item 1 (29 CFR 1910.22(a)(1))
  • Citation 1, Item 2 (29 CFR 1910.138(a))
  • Citation 1, Item 3a (29 CFR 1910.147(c)(4)(i))
  • Citation 1, Item 3b (29 CFR 1910.147(c)(7)(i))
  • Citation 1, Item 3c (29 CFR 1910.147(f)(3)(ii)(D))
  • Citation 1, Item 5 (29 CFR 1910.178(l)(1)(ii))
  • Citation 1, Item 6a (29 CFR 1910.184(c)(1))
  • Citation 1, Item 6b (29 CFR 1910.184(c)(2))
  • Citation 1, Item 6c (29 CFR 1910.184(d))
  • Citation 1, Item 7a (29 CFR 1910.212(a)(1))
  • Citation 1, Item 7b (29 CFR 1910.212(a)(5))
  • Citation 1, Item 8 (29 CFR 1910.242(b))
  • Citation 1, Item 9 (29 CFR 1910.303(g)(2)(i))
  • Citation 2, Item 1 (29 CFR 1910.157(c)(1))

Post this notice near the place where each violation occurred, or where affected employees will readily see it, at the same time as or before the certification is sent to OSHA, for 3 working days (29 CFR 1903.19(g)).

Posted on
Removed on
Posted by

4. Where to send it

Where to send this

OSHA Atlanta East Area Office

Identified from the office code in the public record (0418100). Send it to the address printed on your citation. OSHA office directory

Keep a copy of everything you send and the date you sent it.

Still needed from you

  • Your confirmation that all 14 items have been corrected, with the date and how
  • A check of your citation for the 7 items the public record shows as corrected during the inspection. If the citation notes it, mark it: no certification is needed for those items (29 CFR 1903.19(c)(2))
  • Verification of 7 abatement dates against your citation, settlement or final order: the public record does not settle them (see each item)
  • The name and title of the person signing
  • Signature of the employer or an authorized representative
  • Abatement dates are shown per the public record. If a settlement, petition or informal agreement changed your dates or items, use those.
  • Certification is generally due within 10 calendar days after each abatement date (29 CFR 1903.19(c)).
  • No certification date is estimated for an item the public record shows as contested, settled or otherwise changed, or for a record not confirmed as Federal OSHA. Those items say "Verification required": check them against your citation, settlement agreement or final order.
  • No certification is required for an item your citation notes as corrected during the inspection (29 CFR 1903.19(c)(2)). The public data may say so too, but your citation is what counts.
  • Only certify items that are actually corrected. Knowingly false statements in documents required by the OSH Act are a federal offense (29 U.S.C. 666(g)).
  • The evidence ideas are suggestions, not a statement of what OSHA requires or will accept for a particular item.
  • 29 CFR 1903.19 on eCFR · Independent software. Not affiliated with OSHA. Not legal advice.