Skip to content
Prepared from the public OSHA recordRetrieved Nov 20, 2026

Mazcon, A Kurtz Bros. Company, LLCInspection #1894669 — 14 citation items

MACON, GA · Citation issued Oct 14, 2026

Your OSHA case preview Free · from the public OSHA record

Inspection
#1894669
Citation items
1413 Serious · 1 Other-than-serious
Abatement dates
Dec 9, 2026 – Dec 30, 2026Per the public record · 14 to verify against your copy
Citation status public record
5 of 14 with no completion recordedYour certification is generally due within 10 days after each abatement date
Evidence sections
14 item foldersSuggested: Photos · Invoices and receipts · Training records · Written programs · Inspection and test records

Verification required before any date is estimated

The public record shows a contest, settlement or other change, or no usable date, for 5 items. Check each item below against your citation, settlement or final order.

CiteClock estimates a certification date only from a Federal OSHA abatement date that nothing in the public record changes. If a settlement or agreement changed your dates, use those.

Your abatement packet is already drafted.

Your case, organized

  1. What the inspection contains Public record

    14 cited items under 29 CFR 1910.22(a)(1), 29 CFR 1910.138(a), 29 CFR 1910.147(c)(4)(i) and 11 more, issued Oct 14, 2026 by OSHA Atlanta East Area Office.

  2. What you'll document From you

    For each item you have corrected: the date, what was done, and a photo or record that shows it. Then your signature on the certification. Nothing is confirmed for you.

  3. How CiteClock structures it Already drafted

    One section per item with suggested evidence (for example: “Photo of the corrected walking-working surface, railing or ladder”), the certification letter in OSHA's sample format, the employee posting and where to send it. See the free draft PDF.

  4. After you unlock

    Confirm each corrected item, add photos and files from your phone, keep everything in one private case, and download the finished packet without the DRAFT mark.

Item by item

CiteClock prepared each item from the public record. After you buy, you confirm each one with the date and what you did, and add a photo.

  1. Citation 1 · Item 129 CFR 1910.22(a)(1)Verification required
    1. Item
    2. Public record
    3. Abatement date
    4. Confirm corrected
    5. Add evidence
    6. Ready for packet

    Clean and orderly work areas · Plain-English summary, not legal advice

    All places of employment, passageways, storerooms, service rooms and walking-working surfaces must be kept clean, orderly and sanitary.

    Official text

    What the public record says

    Serious · No abatement completion recorded in the public data

    Verification required Needs review

    Informal settlement on November 9, 2026, per the public record. A settlement or a petition to modify the abatement date can change the date and what has to be certified (29 CFR 1903.19(b)(2)(i)), so check the date against that document. The record's abatement date changed from November 9, 2026, as issued, to December 30, 2026.

    You confirm this item in your private case, with the date and what you did. Nothing is ever confirmed for you.

    Possible supporting evidence

    • Photo of the corrected walking-working surface, railing or ladder
    • Invoice for repair or replacement
    • Inspection record

    Serious item: attach documents if your citation says they are required (1903.19(d)).

    Suggestions only, not a statement of what OSHA requires or will accept.

  2. Citation 1 · Item 229 CFR 1910.138(a)Verification required
    1. Item
    2. Public record
    3. Abatement date
    4. Confirm corrected
    5. Add evidence
    6. Ready for packet

    Serious item under 29 CFR 1910.138(a)

    What the public record says

    Serious · No abatement completion recorded in the public data

    Verification required Needs review

    Informal settlement on November 9, 2026, per the public record. A settlement or a petition to modify the abatement date can change the date and what has to be certified (29 CFR 1903.19(b)(2)(i)), so check the date against that document. The record's abatement date changed from November 9, 2026, as issued, to December 9, 2026.

    You confirm this item in your private case, with the date and what you did. Nothing is ever confirmed for you.

    Possible supporting evidence

    • Written PPE hazard assessment certification
    • Purchase record for the protective equipment
    • Training roster

    Serious item: attach documents if your citation says they are required (1903.19(d)).

    Suggestions only, not a statement of what OSHA requires or will accept.

  3. Citation 1 · Item 3a29 CFR 1910.147(c)(4)(i)Verification required
    1. Item
    2. Public record
    3. Abatement date
    4. Confirm corrected
    5. Add evidence
    6. Ready for packet

    Written lockout/tagout procedures · Plain-English summary, not legal advice

    Procedures for controlling hazardous energy must be written down and used whenever employees service or maintain machines (a limited exception applies when a machine meets every listed condition). The procedures must clearly set out their scope, purpose, authorization, rules and the steps for shutting down, isolating, blocking and securing the machine, placing and removing locks or tags, and checking that the energy is controlled.

    Official text

    What the public record says

    Serious · No abatement completion recorded in the public data

    Verification required Needs review

    Informal settlement on November 9, 2026, per the public record. A settlement or a petition to modify the abatement date can change the date and what has to be certified (29 CFR 1903.19(b)(2)(i)), so check the date against that document. The record's abatement date changed from November 9, 2026, as issued, to December 30, 2026.

    You confirm this item in your private case, with the date and what you did. Nothing is ever confirmed for you.

    Possible supporting evidence

    • Page of your written energy-control (lockout/tagout) procedure for the machine
    • Training roster for authorized and affected employees
    • Record of the periodic inspection of the procedure
    • Photo of the lockout points and locks or tags

    Serious item: attach documents if your citation says they are required (1903.19(d)).

    Suggestions only, not a statement of what OSHA requires or will accept.

  4. Citation 1 · Item 3b29 CFR 1910.147(c)(7)(i)Verification required
    1. Item
    2. Public record
    3. Abatement date
    4. Confirm corrected
    5. Add evidence
    6. Ready for packet

    Lockout/tagout training · Plain-English summary, not legal advice

    Employees must be trained so the energy control program is understood: authorized employees on recognizing and isolating hazardous energy, affected employees on the purpose and use of the procedures, and others in the area about the procedures. Retraining is required when jobs, machines or procedures change, and training must be certified in writing with each employee's name and dates.

    Official text

    What the public record says

    Serious · Recorded in the public data as corrected during the inspection

    If your citation also notes this item as corrected during the inspection, no abatement certification is required for it (29 CFR 1903.19(c)(2)). You mark that yourself in your case, from your citation copy.

    Verification required Unavailable

    Informal settlement on November 9, 2026, per the public record. A settlement or a petition to modify the abatement date can change the date and what has to be certified (29 CFR 1903.19(b)(2)(i)), so check the date against that document. The public record has no abatement date for this item.

    You confirm this item in your private case, with the date and what you did. Nothing is ever confirmed for you.

    Possible supporting evidence

    • Page of your written energy-control (lockout/tagout) procedure for the machine
    • Training roster for authorized and affected employees
    • Record of the periodic inspection of the procedure
    • Photo of the lockout points and locks or tags

    Serious item: attach documents if your citation says they are required (1903.19(d)).

    Suggestions only, not a statement of what OSHA requires or will accept.

  5. Citation 1 · Item 3c29 CFR 1910.147(f)(3)(ii)(D)Verification required
    1. Item
    2. Public record
    3. Abatement date
    4. Confirm corrected
    5. Add evidence
    6. Ready for packet

    Serious item under 29 CFR 1910.147(f)(3)(ii)(D)

    What the public record says

    Serious · Recorded in the public data as corrected during the inspection

    If your citation also notes this item as corrected during the inspection, no abatement certification is required for it (29 CFR 1903.19(c)(2)). You mark that yourself in your case, from your citation copy.

    Verification required Unavailable

    Informal settlement on November 9, 2026, per the public record. A settlement or a petition to modify the abatement date can change the date and what has to be certified (29 CFR 1903.19(b)(2)(i)), so check the date against that document. The public record has no abatement date for this item.

    You confirm this item in your private case, with the date and what you did. Nothing is ever confirmed for you.

    Possible supporting evidence

    • Page of your written energy-control (lockout/tagout) procedure for the machine
    • Training roster for authorized and affected employees
    • Record of the periodic inspection of the procedure
    • Photo of the lockout points and locks or tags

    Serious item: attach documents if your citation says they are required (1903.19(d)).

    Suggestions only, not a statement of what OSHA requires or will accept.

  6. Citation 1 · Item 529 CFR 1910.178(l)(1)(ii)Verification required
    1. Item
    2. Public record
    3. Abatement date
    4. Confirm corrected
    5. Add evidence
    6. Ready for packet

    Serious item under 29 CFR 1910.178(l)(1)(ii)

    What the public record says

    Serious · Recorded in the public data as corrected during the inspection

    If your citation also notes this item as corrected during the inspection, no abatement certification is required for it (29 CFR 1903.19(c)(2)). You mark that yourself in your case, from your citation copy.

    Verification required Unavailable

    Informal settlement on November 9, 2026, per the public record. A settlement or a petition to modify the abatement date can change the date and what has to be certified (29 CFR 1903.19(b)(2)(i)), so check the date against that document. The public record has no abatement date for this item.

    You confirm this item in your private case, with the date and what you did. Nothing is ever confirmed for you.

    Possible supporting evidence

    • Operator training and evaluation certificates
    • Daily truck inspection checklist
    • Repair invoice if the truck was fixed or taken out of service

    Serious item: attach documents if your citation says they are required (1903.19(d)).

    Suggestions only, not a statement of what OSHA requires or will accept.

  7. Citation 1 · Item 6a29 CFR 1910.184(c)(1)Verification required
    1. Item
    2. Public record
    3. Abatement date
    4. Confirm corrected
    5. Add evidence
    6. Ready for packet

    Serious item under 29 CFR 1910.184(c)(1)

    What the public record says

    Serious · Abatement completion recorded in the public data

    Verification required Needs review

    Informal settlement on November 9, 2026, per the public record. A settlement or a petition to modify the abatement date can change the date and what has to be certified (29 CFR 1903.19(b)(2)(i)), so check the date against that document. The record's abatement date changed from November 9, 2026, as issued, to December 30, 2026.

    You confirm this item in your private case, with the date and what you did. Nothing is ever confirmed for you.

    Possible supporting evidence

    • Photo of the corrected condition
    • Repair invoice, receipt or work order
    • Training roster, if employees were trained
    • Written program or procedure page, if one was changed

    Serious item: attach documents if your citation says they are required (1903.19(d)).

    Suggestions only, not a statement of what OSHA requires or will accept.

  8. Citation 1 · Item 6b29 CFR 1910.184(c)(2)Verification required
    1. Item
    2. Public record
    3. Abatement date
    4. Confirm corrected
    5. Add evidence
    6. Ready for packet

    Serious item under 29 CFR 1910.184(c)(2)

    What the public record says

    Serious · No abatement completion recorded in the public data

    Verification required Needs review

    Informal settlement on November 9, 2026, per the public record. A settlement or a petition to modify the abatement date can change the date and what has to be certified (29 CFR 1903.19(b)(2)(i)), so check the date against that document. The record's abatement date changed from November 9, 2026, as issued, to December 30, 2026.

    You confirm this item in your private case, with the date and what you did. Nothing is ever confirmed for you.

    Possible supporting evidence

    • Photo of the corrected condition
    • Repair invoice, receipt or work order
    • Training roster, if employees were trained
    • Written program or procedure page, if one was changed

    Serious item: attach documents if your citation says they are required (1903.19(d)).

    Suggestions only, not a statement of what OSHA requires or will accept.

  9. Citation 1 · Item 6c29 CFR 1910.184(d)Verification required
    1. Item
    2. Public record
    3. Abatement date
    4. Confirm corrected
    5. Add evidence
    6. Ready for packet

    Serious item under 29 CFR 1910.184(d)

    What the public record says

    Serious · No abatement completion recorded in the public data

    Verification required Needs review

    Informal settlement on November 9, 2026, per the public record. A settlement or a petition to modify the abatement date can change the date and what has to be certified (29 CFR 1903.19(b)(2)(i)), so check the date against that document. The record's abatement date changed from November 3, 2026, as issued, to December 30, 2026.

    You confirm this item in your private case, with the date and what you did. Nothing is ever confirmed for you.

    Possible supporting evidence

    • Photo of the corrected condition
    • Repair invoice, receipt or work order
    • Training roster, if employees were trained
    • Written program or procedure page, if one was changed

    Serious item: attach documents if your citation says they are required (1903.19(d)).

    Suggestions only, not a statement of what OSHA requires or will accept.

  10. Citation 1 · Item 7a29 CFR 1910.212(a)(1)Verification required
    1. Item
    2. Public record
    3. Abatement date
    4. Confirm corrected
    5. Add evidence
    6. Ready for packet

    Machine guarding · Plain-English summary, not legal advice

    One or more methods of machine guarding must protect the operator and other employees in the machine area from hazards such as the point of operation, ingoing nip points, rotating parts, and flying chips and sparks. Barrier guards, two-hand tripping devices and electronic safety devices are examples.

    Official text

    What the public record says

    Serious · Recorded in the public data as corrected during the inspection

    If your citation also notes this item as corrected during the inspection, no abatement certification is required for it (29 CFR 1903.19(c)(2)). You mark that yourself in your case, from your citation copy.

    Verification required Unavailable

    Informal settlement on November 9, 2026, per the public record. A settlement or a petition to modify the abatement date can change the date and what has to be certified (29 CFR 1903.19(b)(2)(i)), so check the date against that document. The public record has no abatement date for this item.

    You confirm this item in your private case, with the date and what you did. Nothing is ever confirmed for you.

    Possible supporting evidence

    • Photo of the installed guard on the machine
    • Invoice or work order for the guard or repair
    • Equipment service record

    Serious item: attach documents if your citation says they are required (1903.19(d)).

    Suggestions only, not a statement of what OSHA requires or will accept.

  11. Citation 1 · Item 7b29 CFR 1910.212(a)(5)Verification required
    1. Item
    2. Public record
    3. Abatement date
    4. Confirm corrected
    5. Add evidence
    6. Ready for packet

    Serious item under 29 CFR 1910.212(a)(5)

    What the public record says

    Serious · Recorded in the public data as corrected during the inspection

    If your citation also notes this item as corrected during the inspection, no abatement certification is required for it (29 CFR 1903.19(c)(2)). You mark that yourself in your case, from your citation copy.

    Verification required Unavailable

    Informal settlement on November 9, 2026, per the public record. A settlement or a petition to modify the abatement date can change the date and what has to be certified (29 CFR 1903.19(b)(2)(i)), so check the date against that document. The public record has no abatement date for this item.

    You confirm this item in your private case, with the date and what you did. Nothing is ever confirmed for you.

    Possible supporting evidence

    • Photo of the installed guard on the machine
    • Invoice or work order for the guard or repair
    • Equipment service record

    Serious item: attach documents if your citation says they are required (1903.19(d)).

    Suggestions only, not a statement of what OSHA requires or will accept.

  12. Citation 1 · Item 829 CFR 1910.242(b)Verification required
    1. Item
    2. Public record
    3. Abatement date
    4. Confirm corrected
    5. Add evidence
    6. Ready for packet

    Serious item under 29 CFR 1910.242(b)

    What the public record says

    Serious · Abatement completion recorded in the public data

    Verification required Needs review

    Informal settlement on November 9, 2026, per the public record. A settlement or a petition to modify the abatement date can change the date and what has to be certified (29 CFR 1903.19(b)(2)(i)), so check the date against that document. The record's abatement date changed from November 9, 2026, as issued, to December 30, 2026.

    You confirm this item in your private case, with the date and what you did. Nothing is ever confirmed for you.

    Possible supporting evidence

    • Photo of the corrected condition
    • Repair invoice, receipt or work order
    • Training roster, if employees were trained
    • Written program or procedure page, if one was changed

    Serious item: attach documents if your citation says they are required (1903.19(d)).

    Suggestions only, not a statement of what OSHA requires or will accept.

  13. Citation 1 · Item 929 CFR 1910.303(g)(2)(i)Verification required
    1. Item
    2. Public record
    3. Abatement date
    4. Confirm corrected
    5. Add evidence
    6. Ready for packet

    Serious item under 29 CFR 1910.303(g)(2)(i)

    What the public record says

    Serious · Recorded in the public data as corrected during the inspection

    If your citation also notes this item as corrected during the inspection, no abatement certification is required for it (29 CFR 1903.19(c)(2)). You mark that yourself in your case, from your citation copy.

    Verification required Unavailable

    Informal settlement on November 9, 2026, per the public record. A settlement or a petition to modify the abatement date can change the date and what has to be certified (29 CFR 1903.19(b)(2)(i)), so check the date against that document. The public record has no abatement date for this item.

    You confirm this item in your private case, with the date and what you did. Nothing is ever confirmed for you.

    Possible supporting evidence

    • Photo of the corrected electrical condition (covers, cords, panel access)
    • Electrician's invoice or work order
    • Training roster if employees were retrained

    Serious item: attach documents if your citation says they are required (1903.19(d)).

    Suggestions only, not a statement of what OSHA requires or will accept.

  14. Citation 2 · Item 129 CFR 1910.157(c)(1)Verification required
    1. Item
    2. Public record
    3. Abatement date
    4. Confirm corrected
    5. Add evidence
    6. Ready for packet

    Other-than-serious item under 29 CFR 1910.157(c)(1)

    What the public record says

    Other-than-serious · Recorded in the public data as corrected during the inspection

    If your citation also notes this item as corrected during the inspection, no abatement certification is required for it (29 CFR 1903.19(c)(2)). You mark that yourself in your case, from your citation copy.

    Verification required Unavailable

    Informal settlement on November 9, 2026, per the public record. A settlement or a petition to modify the abatement date can change the date and what has to be certified (29 CFR 1903.19(b)(2)(i)), so check the date against that document. The public record has no abatement date for this item.

    You confirm this item in your private case, with the date and what you did. Nothing is ever confirmed for you.

    Possible supporting evidence

    • Photo of the inspection tag or the mounted extinguisher
    • Service record from the extinguisher vendor
    • Training roster

    Suggestions only, not a statement of what OSHA requires or will accept.

Certification is generally due within 10 calendar days after each abatement date (29 CFR 1903.19). If a settlement changed your dates, use those. 29 CFR 1903.19

The packet, drafted

This is the draft for Mazcon, A Kurtz Bros. Company, LLC. It stays marked DRAFT — PREVIEW until you confirm each item; the signature is always yours.

Abatement certification · draft

To: Area Director, OSHA Atlanta East Area Office
Address: as printed on your citation

MAZCON, A KURTZ BROS. COMPANY, LLC
3240 AVONDALE MILL ROAD, MACON, GA 31216

The hazards referenced in Inspection Number 1894669 for the violations identified below were corrected as follows:

  1. Citation 1, Item 1 was corrected on date to be entered by: method to be entered Awaiting your confirmation · not certified
  2. Citation 1, Item 2 was corrected on date to be entered by: method to be entered Awaiting your confirmation · not certified
  3. Citation 1, Item 3a was corrected on date to be entered by: method to be entered Awaiting your confirmation · not certified
  4. Citation 1, Item 3b was corrected on date to be entered by: method to be entered Awaiting your confirmation · not certified
  5. Citation 1, Item 3c was corrected on date to be entered by: method to be entered Awaiting your confirmation · not certified
  6. Citation 1, Item 5 was corrected on date to be entered by: method to be entered Awaiting your confirmation · not certified
  7. Citation 1, Item 6a was corrected on date to be entered by: method to be entered Awaiting your confirmation · not certified
  8. Citation 1, Item 6b was corrected on date to be entered by: method to be entered Awaiting your confirmation · not certified
  9. Citation 1, Item 6c was corrected on date to be entered by: method to be entered Awaiting your confirmation · not certified
  10. Citation 1, Item 7a was corrected on date to be entered by: method to be entered Awaiting your confirmation · not certified
  11. Citation 1, Item 7b was corrected on date to be entered by: method to be entered Awaiting your confirmation · not certified
  12. Citation 1, Item 8 was corrected on date to be entered by: method to be entered Awaiting your confirmation · not certified
  13. Citation 1, Item 9 was corrected on date to be entered by: method to be entered Awaiting your confirmation · not certified
  14. Citation 2, Item 1 was corrected on date to be entered by: method to be entered Awaiting your confirmation · not certified

I attest that the information contained in this document is accurate and that the affected employees and their representatives have been informed of the abatement.

Signature
Typed or printed name
Title
Date

Signed by the employer or an authorized representative. CiteClock never signs or certifies for you.

Employee posting

Notice to employees: abatement certification

Prepared with CiteClock from the employer's certification. This is not an official OSHA-issued form.

MAZCON, A KURTZ BROS. COMPANY, LLC will certify to the Occupational Safety and Health Administration that the conditions cited in inspection 1894669 and listed below have been corrected. A copy of the certification is available from the employer on request.

Each item below is listed on the final notice once you confirm it.

  • Citation 1, Item 1 (29 CFR 1910.22(a)(1))
  • Citation 1, Item 2 (29 CFR 1910.138(a))
  • Citation 1, Item 3a (29 CFR 1910.147(c)(4)(i))
  • Citation 1, Item 3b (29 CFR 1910.147(c)(7)(i))
  • Citation 1, Item 3c (29 CFR 1910.147(f)(3)(ii)(D))
  • Citation 1, Item 5 (29 CFR 1910.178(l)(1)(ii))
  • Citation 1, Item 6a (29 CFR 1910.184(c)(1))
  • Citation 1, Item 6b (29 CFR 1910.184(c)(2))
  • Citation 1, Item 6c (29 CFR 1910.184(d))
  • Citation 1, Item 7a (29 CFR 1910.212(a)(1))
  • Citation 1, Item 7b (29 CFR 1910.212(a)(5))
  • Citation 1, Item 8 (29 CFR 1910.242(b))
  • Citation 1, Item 9 (29 CFR 1910.303(g)(2)(i))
  • Citation 2, Item 1 (29 CFR 1910.157(c)(1))

Post this notice near the place where each violation occurred, or where affected employees will readily see it, at the same time as or before the certification is sent to OSHA, for 3 working days (29 CFR 1903.19(g)).

Posted on
Removed on
Posted by

Where to send this

OSHA Atlanta East Area Office

Identified from the office code in the public record (0418100). Send it to the address printed on your citation. OSHA office directory

Keep a copy of everything you send and the date you sent it.

Still needed from you

  • Your confirmation that all 14 items have been corrected, with the date and how
  • A check of your citation for the 7 items the public record shows as corrected during the inspection. If the citation notes it, mark it: no certification is needed for those items (29 CFR 1903.19(c)(2))
  • Verification of 7 abatement dates against your citation, settlement or final order: the public record does not settle them (see each item)
  • The name and title of the person signing
  • Signature of the employer or an authorized representative

Unlock this case

One-time payment per case. No subscription or scheduled renewal. Access continues while CiteClock operates, subject to the Terms of Service. Sales tax or VAT may be added at checkout where applicable.

Free preview

Free

You are looking at it.

  • Certification letter, item-by-item closeout and employee posting, drafted
  • Every item with its abatement date per the public record
  • Draft PDF marked DRAFT — PREVIEW

Self-Serve

$49 one time per case

A clear path from citation to a clean closeout packet, for one person.

  • One case · one user
  • Citation management and deadlines
  • Your own photos, PDFs and evidence
  • Missing-document checklist
  • Clean PDF and ZIP exports
  • Basic case history
Start Free — $49 at Export

COMMAND

$149 one time per case

Keep corrective work moving, from assignment to the next inspection.

  • Everything in Self-Serve
  • Up to 5 users on this case, including you
  • Corrective-action planning and task assignments
  • Secure worker evidence requests
  • Supervisor review and approval
  • Full audit history
  • Follow-up reminders and evidence checks
Unlock with COMMAND — $149
Exactly what the plan includes What you provide, what CiteClock drafts, what evidence the rule asks for and who signs
For this caseSelf-Serve $49 one time per caseCOMMAND $149 one time per case
What you provide
  • The facts from your citation and the dates you confirm.
  • What was corrected and when, in your own words, with supporting files.
  • The name and title of the person who signs.
  • The facts from your citation and the dates you confirm.
  • What was corrected and when, in your own words, with supporting files.
  • The name and title of the person who signs.
What CiteClock does
  • Software only: it does not read your photos, decide whether an item is fixed or check your workplace.
  • Organizes citation items, dates and your evidence.
  • Lists missing documents and builds clean PDF/ZIP outputs.
  • Keeps basic case history. One user on this case.
  • Software only: it does not read your photos, decide whether an item is fixed or check your workplace.
  • Organizes citation items, dates and your evidence.
  • Lists missing documents and builds clean PDF/ZIP outputs.
  • Adds draft corrective-action plans for you to review (drafted with AI; you decide what is kept), assignments, worker evidence links and supervisor approvals.
  • Keeps the full audit trail and schedules follow-up evidence checks.
  • Up to 5 people on this case, including its owner.
When it is ready
  • Work at your own pace. Download when you are ready.
  • Coordinate the work at your team’s pace. Download when you are ready.

Access continues while CiteClock operates, subject to the Terms of Service. Sales tax or VAT may be added at checkout where applicable. The $100 upgrade to COMMAND keeps the case's existing access terms. No subscription or scheduled renewal.

What evidence the rule asks for

  • Every item you certify: the date it was corrected and how (29 CFR 1903.19(c)).
  • Willful and repeat items: documents showing the correction, such as photos, receipts or training records (1903.19(d)).
  • Serious items: the same documents when your citation says so (1903.19(d)).
  • Other items: the rule does not require documents. A photo or record kept with the packet is optional.
  • Abatement plans and progress reports: only when your citation asks for them (1903.19(e) and (f)).

Read 29 CFR 1903.19

What you get

  • One PDF to sign and send: cover, items at a glance, the certification letter in the layout of OSHA's Appendix A sample (only the items you confirmed), each item with its files after it, the employee posting, where to send it and an evidence index.
  • Abatement plan and progress report forms in the Appendix B layout, when your citation requires them.
  • Your private case and archive: every file, confirmation and packet you send, kept with its date.

See a completed sample packet

Who verifies and signs

  • You confirm every fact. CiteClock never marks an item corrected for you.
  • The employer or an authorized representative signs the letter, sends the packet to the OSHA Area Office on the citation and posts the employee notice.
  • CiteClock lists what is missing. It cannot confirm a hazard was fixed, and it never signs, certifies or files anything with OSHA.

Not included

  • Legal advice, contesting or negotiating the citation, or dealing with OSHA for you. CiteClock is independent software, not a law firm, and not affiliated with OSHA.

You end with a packet like this one: See a completed sample packet

Your team does the corrective work. CiteClock keeps the tasks, evidence requests and closeout records together in one case.

Secure checkout by Paddle, our merchant of record. Organizing is free: sign in with your email and start. When you want the clean exports, confirm when the citation arrived, then pay. Full refund within 14 days.

Secure Checkout by Paddle. Billing note: Your purchase is for CiteClock. Paddle processes the payment as Merchant of Record. The operator’s registered name, Quote reclaim, may appear at checkout. Questions? hello@citeclock.com.

About CiteClock

CiteClock Support
Independent software for OSHA abatement closeouts

CiteClock was built so an employer can close out a citation without paying for hours of someone sorting files. The draft above was prepared from the public record before you arrived. Questions about your case? A person at CiteClock reads every message: hello@citeclock.com

  • Public data only on this page. Everything here comes from the U.S. Department of Labor's public enforcement data. Privacy · Terms
  • Your files stay private. Photos and documents you add go to your private case, never to this page. No third-party tracking pixels or ad trackers.
  • You stay in control. You confirm every item and sign the certification. CiteClock never certifies anything for you.
  • Refunds and support. Full refund within 14 days. Refund policy · hello@citeclock.com

Independent software. Not affiliated with OSHA. Not legal advice. CiteClock does not predict outcomes or penalty changes, and it does not sign or file anything with OSHA.

Standards cited in this inspection

Full citation text from the public record

14 items, as published
  • Citation 1 · Item 1

    Walking-working surfaces

    $16,550proposed

    Serious29 CFR 1910.22(a)(1)Correct by Dec 30, 2026
    What this standard covers

    General requirements for walking-working surfaces such as floors, aisles and walkways.

    Records you may want to gather

    • Existing written program or procedure, if one applies
    • Relevant training records
    • Dated photographs of the cited condition and any corrective work
    • Inspection, maintenance or repair records
    • Records of corrective actions already taken

    As published in the public record

    19100022 A01

    Read the official standard
  • Citation 1 · Item 2

    Hand protection

    $11,823proposed

    Serious29 CFR 1910.138(a)Correct by Dec 9, 2026
    What this standard covers

    Records you may want to gather

    • Existing written program or procedure, if one applies
    • Relevant training records
    • Dated photographs of the cited condition and any corrective work
    • Inspection, maintenance or repair records
    • Records of corrective actions already taken

    As published in the public record

    19100138 A

    Read the official standard
  • Citation 1 · Item 3a

    Lockout/tagout (hazardous energy)

    $16,550proposed

    Serious29 CFR 1910.147(c)(4)(i)Correct by Dec 30, 2026
    What this standard covers

    Control of hazardous energy during servicing and maintenance of machines and equipment.

    Records you may want to gather

    • Existing energy-control procedures
    • Relevant training records
    • Periodic inspection records
    • Dated records of corrective work, if any

    As published in the public record

    19100147 C04 I

    Read the official standard
  • Citation 1 · Item 3b

    Lockout/tagout (hazardous energy)

    $0proposed

    Serious29 CFR 1910.147(c)(7)(i)Correction date: see your citation
    What this standard covers

    Control of hazardous energy during servicing and maintenance of machines and equipment.

    Records you may want to gather

    • Existing energy-control procedures
    • Relevant training records
    • Periodic inspection records
    • Dated records of corrective work, if any

    As published in the public record

    19100147 C07 I

    Read the official standard
  • Citation 1 · Item 3c

    Lockout/tagout (hazardous energy)

    $11,823proposed

    Serious29 CFR 1910.147(f)(3)(ii)(D)Correction date: see your citation
    What this standard covers

    Control of hazardous energy during servicing and maintenance of machines and equipment.

    Records you may want to gather

    • Existing energy-control procedures
    • Relevant training records
    • Periodic inspection records
    • Dated records of corrective work, if any

    As published in the public record

    19100147 F03 II D

    Read the official standard
  • Citation 1 · Item 5

    Powered industrial trucks (forklifts)

    $14,187proposed

    Serious29 CFR 1910.178(l)(1)(ii)Correction date: see your citation
    What this standard covers

    Powered industrial trucks (such as forklifts), including operator training and operation.

    Records you may want to gather

    • Existing written program or procedure, if one applies
    • Relevant training records
    • Dated photographs of the cited condition and any corrective work
    • Inspection, maintenance or repair records
    • Records of corrective actions already taken

    As published in the public record

    19100178 L01 II

    Read the official standard
  • Citation 1 · Item 6a

    Slings

    $9,457proposed

    Serious29 CFR 1910.184(c)(1)Correct by Dec 30, 2026
    What this standard covers

    Records you may want to gather

    • Existing written program or procedure, if one applies
    • Relevant training records
    • Dated photographs of the cited condition and any corrective work
    • Inspection, maintenance or repair records
    • Records of corrective actions already taken

    As published in the public record

    19100184 C01

    Read the official standard
  • Citation 1 · Item 6b

    Slings

    $0proposed

    Serious29 CFR 1910.184(c)(2)Correct by Dec 30, 2026
    What this standard covers

    Records you may want to gather

    • Existing written program or procedure, if one applies
    • Relevant training records
    • Dated photographs of the cited condition and any corrective work
    • Inspection, maintenance or repair records
    • Records of corrective actions already taken

    As published in the public record

    19100184 C02

    Read the official standard
  • Citation 1 · Item 6c

    Slings

    $0proposed

    Serious29 CFR 1910.184(d)Correct by Dec 30, 2026
    What this standard covers

    Records you may want to gather

    • Existing written program or procedure, if one applies
    • Relevant training records
    • Dated photographs of the cited condition and any corrective work
    • Inspection, maintenance or repair records
    • Records of corrective actions already taken

    As published in the public record

    19100184 D

    Read the official standard
  • Citation 1 · Item 7a

    Machine guarding

    $9,457proposed

    Serious29 CFR 1910.212(a)(1)Correction date: see your citation
    What this standard covers

    General requirements for guarding machines against hazards from operation and moving parts.

    Records you may want to gather

    • Dated photographs of the identified equipment
    • Existing guard inspection records
    • Repair receipts or corrective-work records, if any

    As published in the public record

    19100212 A01

    Read the official standard
  • Citation 1 · Item 7b

    Machine guarding

    $0proposed

    Serious29 CFR 1910.212(a)(5)Correction date: see your citation
    What this standard covers

    General requirements for guarding machines against hazards from operation and moving parts.

    Records you may want to gather

    • Dated photographs of the identified equipment
    • Existing guard inspection records
    • Repair receipts or corrective-work records, if any

    As published in the public record

    19100212 A05

    Read the official standard
  • Citation 1 · Item 8

    Hand and portable powered tools

    $7,093proposed

    Serious29 CFR 1910.242(b)Correct by Dec 30, 2026
    What this standard covers

    Records you may want to gather

    • Existing written program or procedure, if one applies
    • Relevant training records
    • Dated photographs of the cited condition and any corrective work
    • Inspection, maintenance or repair records
    • Records of corrective actions already taken

    As published in the public record

    19100242 B

    Read the official standard
  • Citation 1 · Item 9

    Electrical: general requirements

    $7,093proposed

    Serious29 CFR 1910.303(g)(2)(i)Correction date: see your citation
    What this standard covers

    General requirements for electrical installations and equipment.

    Records you may want to gather

    • Existing written program or procedure, if one applies
    • Relevant training records
    • Dated photographs of the cited condition and any corrective work
    • Inspection, maintenance or repair records
    • Records of corrective actions already taken

    As published in the public record

    19100303 G02 I

    Read the official standard
  • Citation 2 · Item 1

    Portable fire extinguishers

    $0proposed

    Other-than-serious29 CFR 1910.157(c)(1)Correction date: see your citation
    What this standard covers

    Portable fire extinguishers, including placement, maintenance and training.

    Records you may want to gather

    • Existing written program or procedure, if one applies
    • Relevant training records
    • Dated photographs of the cited condition and any corrective work
    • Inspection, maintenance or repair records
    • Records of corrective actions already taken

    As published in the public record

    19100157 C01

    Read the official standard

Your response timeline

Contest and other responses, counted from the day you received the citation

Your response timeline

For certain responses, including a notice of contest, OSHA counts 15 working days from the day your company received the citation, not the date OSHA issued it. Enter that date to see the estimate.

The date it arrived (for example, the certified-mail delivery date).
An estimate from the date you enter. CiteClock does not verify when your citation arrived. Weekends and observed federal holidays are excluded; special closures or case-specific orders can change the timing. Confirm with the issuing OSHA area office or a qualified professional.How OSHA counts working days: 29 CFR 1903.22(c)

Plain-English guides: the first 15 working days after a citation, the informal conference and asking for more time to abate.

Official source

Official OSHA record · Inspection #1894669

Employer as published: MAZCON, A KURTZ BROS. COMPANY, LLC

From the public record as of Nov 20, 2026.

Public case information shown here is sourced from official public enforcement records published by the U.S. Department of Labor. Check it against OSHA's own page before you rely on anything here.

  • Employer name
  • Inspection number
  • Citation items and classifications
  • Proposed penalties
  • Issuance and abatement dates

Proposed penalties in the public record: $104,033. Proposed, not a final amount.

Verify on OSHA.gov

CiteClock is independent software. It is not OSHA, not affiliated with the U.S. Department of Labor or any government agency, and not a law firm. This page is not a government notice.

Working with an attorney or safety consultant?