Skip to content

Free tool · 29 CFR 1903.19 · not legal advice

OSHA abatement certification deadline calculator

After you correct a cited hazard, the Federal OSHA rule requires a written certification within 10 calendar days after that item's abatement date. Enter each citation item to see when its certification is due, or why none is due yet.

This calculator follows the Federal OSHA rule (29 CFR 1903.19).29 State Plans run their own OSHA programs (22 of them cover private employers) and can set their own abatement, certification and contest rules and deadlines. If a State Plan issued your citation, check that plan's rules instead: osha.gov/stateplans.
State Plans covering private employers

Alaska Occupational Safety and Health (AKOSH); Arizona Division of Occupational Safety and Health (ADOSH); California Division of Occupational Safety and Health (Cal/OSHA); Hawaii Occupational Safety and Health (HIOSH); Indiana Occupational Safety and Health Administration (IOSHA); Iowa OSHA; Kentucky Occupational Safety and Health; Maryland Occupational Safety and Health (MOSH); Michigan Occupational Safety and Health Administration (MIOSHA); Minnesota OSHA; Nevada OSHA; New Mexico Occupational Health and Safety Bureau; North Carolina Department of Labor — OSH Division; Oregon OSHA; Puerto Rico Occupational Safety and Health Administration (PR OSHA); South Carolina OSHA; Tennessee Occupational Safety and Health Administration (TOSHA); Utah Occupational Safety and Health (UOSH); Vermont Occupational Safety and Health Administration (VOSHA); Virginia Occupational Safety and Health (VOSH); Washington Department of Labor & Industries — DOSH; Wyoming OSHA.

Certification due dates

For each citation item, choose how it stands and enter the abatement (correction) date printed on your citation. Nothing you enter leaves this page.

Each cited item → certification due

Enter a date

Federal OSHA rule only. Each due date is 10 calendar days after the abatement date (29 CFR 1903.19(c)(1)); the rule gives no weekend or holiday extension, so submit early. CiteClock does not verify your dates. If a settlement or final order changed an abatement date, use that date. Informational only, not legal advice; your citation and the official text govern.

Get the certification drafted for you

Look up your OSHA inspection number to see a free preview of your abatement packet, drafted from the public record: the certification letter, a page per cited item and the employee posting.

Look up my inspection number — free preview See a completed sample packet

Worked example

Four items from one sample citation, each handled differently. The dates are made up for illustration.

ItemStatusAbatement dateCertification
Citation 1, Item 1Correcting by the citation's abatement dateMonday, November 2, 2026Certification due Thursday, November 12, 2026
Citation 1, Item 2Corrected during the inspectionCorrected during the inspectionNo certification required only if both are true: during the on-site inspection, the OSHA compliance officer observed the correction within 24 hours after the violation was identified, and the citation notes that it was abated (1903.19(c)(2)). Otherwise, certify as usual.
Citation 1, Item 3Contested in good faithSet by the final orderNo due date yet. While a good-faith contest is pending, the abatement period does not run; the abatement date is set from the final order (1903.19(b)(2)(ii)). Certify within 10 calendar days after that date.
Citation 2, Item 1Petition for Modification of Abatement filedMonday, November 2, 2026 (original); OSHA approved Monday, December 14, 2026Certification due Thursday, December 24, 2026 (from the new date OSHA approved, Monday, December 14, 2026)

How the 10 days are counted

The rule says: “Within 10 calendar days after the abatement date, the employer must certify to OSHA (the Agency) that each cited violation has been abated” (1903.19(c)(1)). Count calendar days; the rule gives no weekend/holiday extension — submit early. Each item has its own abatement date, so each item has its own certification date. A mailed submission counts on its postmark date; anything sent another way counts when OSHA receives it ((h)(2)).

The “abatement date” is the later of the date on the citation, a date OSHA approved (or litigation set) on a petition to modify it, or a date set by an informal settlement agreement ((b)(2)). If one of those changed your date, enter the new one.

Items corrected during the inspection

The rule says: “The employer is not required to certify abatement if the OSHA Compliance Officer, during the on-site portion of the inspection: (i) Observes, within 24 hours after a violation is identified, that abatement has occurred; and (ii) Notes in the citation that abatement has occurred” (1903.19(c)(2)). Both parts must be true. Check the item on your citation: if it does not record the item as corrected during the inspection, certify it as usual.

Contested items

For an item you contest in good faith, the period to correct it does not begin to run until the Review Commission enters a final order (OSH Act section 10(b)). The abatement date then becomes the later of the date in the final order, the final order date plus the abatement period on the citation, or a date set by a formal settlement agreement (1903.19(b)(2)(ii)). Certify within 10 calendar days after that date. A notice of contest must be postmarked within 15 working days of receiving the citation and notice of proposed penalty, and it must say whether it contests the citation, the penalty or both (29 CFR 1903.17). Working days are Monday through Friday, not Saturdays, Sundays or Federal holidays; the day you receive the citation is not counted and the last of the 15 working days is (29 CFR 1903.22(c)). Contesting only the penalty may not pause the abatement date. Whether to contest is your decision; get qualified advice if you are unsure.

Need more time? A Petition for Modification of Abatement

If an item cannot be corrected by its abatement date despite good-faith efforts, because of factors beyond your reasonable control, you can file a Petition for Modification of Abatement with the OSHA Area Director who issued the citation. It must be filed no later than the close of the next working day after the original abatement date; a later petition needs a statement of exceptional circumstances (29 CFR 1903.14a). Filing is not an automatic extension: the original date applies unless OSHA approves a new one. If it does, enter the approved date in the calculator and count the certification from that date.

Documents, posting, plans and progress reports

Documents showing the abatement is complete go with the certification for each willful or repeat violation, and for any serious violation where the citation says documents are required (1903.19(d)(1)). They may include purchase or repair records, photos or video, or other written records ((d)(2)).

Post a copy of each document you send OSHA, or a summary of it, near the place where the violation occurred, at the same time as or before you send it, and leave it up, not altered, defaced or covered, for three working days after you submit it to OSHA (1903.19(g)(4)(ii)).

If the citation requires an abatement plan, it is due within 25 calendar days from the final order date ((e)(2)), and if it requires progress reports, the citation gives their dates ((f)). This calculator does not compute those dates.

For the whole rule, see OSHA abatement certification, in plain English; for what to write, see the abatement certification letter sample and rules; if you need more time, see how to ask OSHA for an abatement extension; for the contest window, see responding to an OSHA citation; or see the official text of 29 CFR 1903.19. This calculator is informational only, not legal advice; your citation and the official text govern. CiteClock does not verify the dates you enter. Independent software. Not affiliated with OSHA. Not legal advice.