Skip to content

29 CFR 1910.147 · plain-english summary, not legal advice

OSHA 1910.147: Lockout/tagout (hazardous energy)

Control of hazardous energy during servicing and maintenance of machines and equipment. Read the official text of 29 CFR 1910.147 on eCFR.

What the most-cited paragraphs say

1910.147(c)(1): Energy control (lockout/tagout) program

The employer must have an energy control program made up of written procedures, employee training and periodic inspections, so that before anyone services or maintains a machine that could start up or release stored energy unexpectedly, it is isolated from its energy source and made inoperative.

1910.147(c)(4): Written lockout/tagout procedures

Procedures for controlling hazardous energy must be written down and used whenever employees service or maintain machines (a limited exception applies when a machine meets every listed condition). The procedures must clearly set out their scope, purpose, authorization, rules and the steps for shutting down, isolating, blocking and securing the machine, placing and removing locks or tags, and checking that the energy is controlled.

1910.147(c)(6): Yearly inspection of lockout/tagout procedures

At least once a year, an authorized employee other than the ones using a procedure must inspect each energy control procedure to make sure it is being followed and to correct problems. The employer must certify each inspection in writing: the machine, the date, the employees included and who did the inspection.

1910.147(c)(7): Lockout/tagout training

Employees must be trained so the energy control program is understood: authorized employees on recognizing and isolating hazardous energy, affected employees on the purpose and use of the procedures, and others in the area about the procedures. Retraining is required when jobs, machines or procedures change, and training must be certified in writing with each employee's name and dates.

Written from the official text on eCFR (title 29 as of 2026-10-05). The official text governs.

Typical abatement evidence for a 1903.19 certification

After a citation under 1910.147, the employer certifies to OSHA that each cited item was corrected, within 10 calendar days of its abatement date (1903.19(c)(1)). When documents are required, they may include evidence of the purchase or repair of equipment, photographs or video, or other written records (1903.19(d)(2)). Records employers commonly keep for this standard:

  • Existing energy-control procedures
  • Relevant training records
  • Periodic inspection records
  • Dated records of corrective work, if any

Examples only, not a list of what OSHA requires or will accept. Your citation says which items need documents. How abatement certification works · Sample certification letter.

Find your dates

Search the public record by company name or inspection number to see each cited item and its abatement date, or work out a certification due date with the abatement deadline calculator.

Recent public OSHA cases citing 1910.147

From the U.S. Department of Labor's public enforcement data. Verify each record on OSHA.gov.

Plain-English summary, not legal advice; see 29 CFR 1910.147 for the official text. Independent software. Not affiliated with OSHA. Not legal advice.