Skip to content
Prepared from the public OSHA recordRetrieved Nov 21, 2026

Faustson Tool Corp.Inspection #1893105 — 7 citation items

ARVADA, CO · Citation issued Oct 8, 2026

Your OSHA case preview Free · from the public OSHA record

Inspection
#1893105
Citation items
76 Serious · 1 Other-than-serious
Abatement dates
Nov 23, 2026Per the public record · 7 to verify against your copy
Citation status public record
Completion recorded for all 7Keep your proof in case OSHA asks for it
Evidence sections
7 item foldersSuggested: Photos · Invoices and receipts · Training records · Written programs

Abatement completion recorded in the public record for every item

CiteClock estimates a certification date only from a Federal OSHA abatement date that nothing in the public record changes. If a settlement or agreement changed your dates, use those.

Your abatement packet is already drafted.

Your case, organized

  1. What the inspection contains Public record

    7 cited items under 29 CFR 1910.147(c)(4)(i), 29 CFR 1910.212(a)(1), 29 CFR 1910.305(g)(1)(iii) and 4 more, issued Oct 8, 2026 by OSHA Englewood Area Office.

  2. What you'll document From you

    For each item you have corrected: the date, what was done, and a photo or record that shows it. Then your signature on the certification. Nothing is confirmed for you.

  3. How CiteClock structures it Already drafted

    One section per item with suggested evidence (for example: “Page of your written energy-control (lockout/tagout) procedure for the machine”), the certification letter in OSHA's sample format, the employee posting and where to send it. See the free draft PDF.

  4. After you unlock

    Confirm each corrected item, add photos and files from your phone, keep everything in one private case, and download the finished packet without the DRAFT mark.

Item by item

CiteClock prepared each item from the public record. After you buy, you confirm each one with the date and what you did, and add a photo.

  1. Citation 1 · Item 129 CFR 1910.147(c)(4)(i)Verification required
    1. Item
    2. Public record
    3. Abatement date
    4. Confirm corrected
    5. Add evidence
    6. Ready for packet

    Written lockout/tagout procedures · Plain-English summary, not legal advice

    Procedures for controlling hazardous energy must be written down and used whenever employees service or maintain machines (a limited exception applies when a machine meets every listed condition). The procedures must clearly set out their scope, purpose, authorization, rules and the steps for shutting down, isolating, blocking and securing the machine, placing and removing locks or tags, and checking that the energy is controlled.

    Official text

    What the public record says

    Serious · Abatement completion recorded in the public data

    Verification required Needs review

    Informal settlement on November 3, 2026, per the public record. A settlement or a petition to modify the abatement date can change the date and what has to be certified (29 CFR 1903.19(b)(2)(i)), so check the date against that document. The abatement date in the public record is November 23, 2026.

    You confirm this item in your private case, with the date and what you did. Nothing is ever confirmed for you.

    Possible supporting evidence

    • Page of your written energy-control (lockout/tagout) procedure for the machine
    • Training roster for authorized and affected employees
    • Record of the periodic inspection of the procedure
    • Photo of the lockout points and locks or tags

    Serious item: attach documents if your citation says they are required (1903.19(d)).

    Suggestions only, not a statement of what OSHA requires or will accept.

  2. Citation 1 · Item 229 CFR 1910.212(a)(1)Verification required
    1. Item
    2. Public record
    3. Abatement date
    4. Confirm corrected
    5. Add evidence
    6. Ready for packet

    Machine guarding · Plain-English summary, not legal advice

    One or more methods of machine guarding must protect the operator and other employees in the machine area from hazards such as the point of operation, ingoing nip points, rotating parts, and flying chips and sparks. Barrier guards, two-hand tripping devices and electronic safety devices are examples.

    Official text

    What the public record says

    Serious · Abatement completion recorded in the public data

    Verification required Needs review

    Informal settlement on November 3, 2026, per the public record. A settlement or a petition to modify the abatement date can change the date and what has to be certified (29 CFR 1903.19(b)(2)(i)), so check the date against that document. The abatement date in the public record is November 23, 2026.

    You confirm this item in your private case, with the date and what you did. Nothing is ever confirmed for you.

    Possible supporting evidence

    • Photo of the installed guard on the machine
    • Invoice or work order for the guard or repair
    • Equipment service record

    Serious item: attach documents if your citation says they are required (1903.19(d)).

    Suggestions only, not a statement of what OSHA requires or will accept.

  3. Citation 1 · Item 329 CFR 1910.305(g)(1)(iii)Verification required
    1. Item
    2. Public record
    3. Abatement date
    4. Confirm corrected
    5. Add evidence
    6. Ready for packet

    Serious item under 29 CFR 1910.305(g)(1)(iii)

    What the public record says

    Serious · Abatement completion recorded in the public data

    Verification required Needs review

    Informal settlement on November 3, 2026, per the public record. A settlement or a petition to modify the abatement date can change the date and what has to be certified (29 CFR 1903.19(b)(2)(i)), so check the date against that document. The abatement date in the public record is November 23, 2026.

    You confirm this item in your private case, with the date and what you did. Nothing is ever confirmed for you.

    Possible supporting evidence

    • Photo of the corrected electrical condition (covers, cords, panel access)
    • Electrician's invoice or work order
    • Training roster if employees were retrained

    Serious item: attach documents if your citation says they are required (1903.19(d)).

    Suggestions only, not a statement of what OSHA requires or will accept.

  4. Citation 1 · Item 4a29 CFR 1910.1200(e)(1)Verification required
    1. Item
    2. Public record
    3. Abatement date
    4. Confirm corrected
    5. Add evidence
    6. Ready for packet

    Written hazard communication program · Plain-English summary, not legal advice

    Each workplace needs a written hazard communication program that is put into practice and kept up to date. It explains how labels, safety data sheets and employee training are handled, and it includes a list of the hazardous chemicals present and how employees are told about the hazards of non-routine tasks and of chemicals in unlabeled pipes.

    Official text

    What the public record says

    Serious · Abatement completion recorded in the public data

    Verification required Needs review

    Informal settlement on November 3, 2026, per the public record. A settlement or a petition to modify the abatement date can change the date and what has to be certified (29 CFR 1903.19(b)(2)(i)), so check the date against that document. The abatement date in the public record is November 23, 2026.

    You confirm this item in your private case, with the date and what you did. Nothing is ever confirmed for you.

    Possible supporting evidence

    • Page of your written hazard communication program
    • Safety data sheet index or binder page
    • Training roster with date and topics
    • Photo of the corrected container labels

    Serious item: attach documents if your citation says they are required (1903.19(d)).

    Suggestions only, not a statement of what OSHA requires or will accept.

  5. Citation 1 · Item 4b29 CFR 1910.1200(f)(6)(i)Verification required
    1. Item
    2. Public record
    3. Abatement date
    4. Confirm corrected
    5. Add evidence
    6. Ready for packet

    Labels on workplace containers · Plain-English summary, not legal advice

    Each container of a hazardous chemical in the workplace must be labeled, tagged or marked, either with the full label information required on shipped containers or with the product identifier plus words, pictures or symbols giving at least general information about its hazards. Some exceptions apply to stationary and portable containers.

    Official text

    What the public record says

    Serious · Abatement completion recorded in the public data

    Verification required Needs review

    Informal settlement on November 3, 2026, per the public record. A settlement or a petition to modify the abatement date can change the date and what has to be certified (29 CFR 1903.19(b)(2)(i)), so check the date against that document. The abatement date in the public record is November 23, 2026.

    You confirm this item in your private case, with the date and what you did. Nothing is ever confirmed for you.

    Possible supporting evidence

    • Page of your written hazard communication program
    • Safety data sheet index or binder page
    • Training roster with date and topics
    • Photo of the corrected container labels

    Serious item: attach documents if your citation says they are required (1903.19(d)).

    Suggestions only, not a statement of what OSHA requires or will accept.

  6. Citation 1 · Item 4c29 CFR 1910.1200(h)(1)Verification required
    1. Item
    2. Public record
    3. Abatement date
    4. Confirm corrected
    5. Add evidence
    6. Ready for packet

    Hazard communication training · Plain-English summary, not legal advice

    Employees must get effective information and training on the hazardous chemicals in their work area when they are first assigned there and whenever a new chemical hazard is brought in. Training can cover categories of hazards or specific chemicals; chemical-specific information must stay available through labels and safety data sheets.

    Official text

    What the public record says

    Serious · Abatement completion recorded in the public data

    Verification required Needs review

    Informal settlement on November 3, 2026, per the public record. A settlement or a petition to modify the abatement date can change the date and what has to be certified (29 CFR 1903.19(b)(2)(i)), so check the date against that document. The abatement date in the public record is November 23, 2026.

    You confirm this item in your private case, with the date and what you did. Nothing is ever confirmed for you.

    Possible supporting evidence

    • Page of your written hazard communication program
    • Safety data sheet index or binder page
    • Training roster with date and topics
    • Photo of the corrected container labels

    Serious item: attach documents if your citation says they are required (1903.19(d)).

    Suggestions only, not a statement of what OSHA requires or will accept.

  7. Citation 2 · Item 129 CFR 1910.132(d)(2)Verification required
    1. Item
    2. Public record
    3. Abatement date
    4. Confirm corrected
    5. Add evidence
    6. Ready for packet

    Written certification of the PPE hazard assessment · Plain-English summary, not legal advice

    The hazard assessment must be confirmed by a written certification that names the workplace evaluated, the person certifying it and the date(s) of the assessment, and identifies the document as a certification of hazard assessment.

    Official text

    What the public record says

    Other-than-serious · Abatement completion recorded in the public data

    Verification required Needs review

    Informal settlement on November 3, 2026, per the public record. A settlement or a petition to modify the abatement date can change the date and what has to be certified (29 CFR 1903.19(b)(2)(i)), so check the date against that document. The abatement date in the public record is November 23, 2026.

    You confirm this item in your private case, with the date and what you did. Nothing is ever confirmed for you.

    Possible supporting evidence

    • Written PPE hazard assessment certification
    • Purchase record for the protective equipment
    • Training roster

    Suggestions only, not a statement of what OSHA requires or will accept.

Certification is generally due within 10 calendar days after each abatement date (29 CFR 1903.19). If a settlement changed your dates, use those. 29 CFR 1903.19

The packet, drafted

This is the draft for Faustson Tool Corp. It stays marked DRAFT — PREVIEW until you confirm each item; the signature is always yours.

Abatement certification · draft

To: Area Director, OSHA Englewood Area Office
Address: as printed on your citation

FAUSTSON TOOL CORP.
6803 JOYCE STREET, SUITE A, ARVADA, CO 80007

The hazards referenced in Inspection Number 1893105 for the violations identified below were corrected as follows:

  1. Citation 1, Item 1 was corrected on date to be entered by: method to be entered Awaiting your confirmation · not certified
  2. Citation 1, Item 2 was corrected on date to be entered by: method to be entered Awaiting your confirmation · not certified
  3. Citation 1, Item 3 was corrected on date to be entered by: method to be entered Awaiting your confirmation · not certified
  4. Citation 1, Item 4a was corrected on date to be entered by: method to be entered Awaiting your confirmation · not certified
  5. Citation 1, Item 4b was corrected on date to be entered by: method to be entered Awaiting your confirmation · not certified
  6. Citation 1, Item 4c was corrected on date to be entered by: method to be entered Awaiting your confirmation · not certified
  7. Citation 2, Item 1 was corrected on date to be entered by: method to be entered Awaiting your confirmation · not certified

I attest that the information contained in this document is accurate and that the affected employees and their representatives have been informed of the abatement.

Signature
Typed or printed name
Title
Date

Signed by the employer or an authorized representative. CiteClock never signs or certifies for you.

Employee posting

Notice to employees: abatement certification

Prepared with CiteClock from the employer's certification. This is not an official OSHA-issued form.

FAUSTSON TOOL CORP. will certify to the Occupational Safety and Health Administration that the conditions cited in inspection 1893105 and listed below have been corrected. A copy of the certification is available from the employer on request.

Each item below is listed on the final notice once you confirm it.

  • Citation 1, Item 1 (29 CFR 1910.147(c)(4)(i))
  • Citation 1, Item 2 (29 CFR 1910.212(a)(1))
  • Citation 1, Item 3 (29 CFR 1910.305(g)(1)(iii))
  • Citation 1, Item 4a (29 CFR 1910.1200(e)(1))
  • Citation 1, Item 4b (29 CFR 1910.1200(f)(6)(i))
  • Citation 1, Item 4c (29 CFR 1910.1200(h)(1))
  • Citation 2, Item 1 (29 CFR 1910.132(d)(2))

Post this notice near the place where each violation occurred, or where affected employees will readily see it, at the same time as or before the certification is sent to OSHA, for 3 working days (29 CFR 1903.19(g)).

Posted on
Removed on
Posted by

Where to send this

OSHA Englewood Area Office

Identified from the office code in the public record (0830600). Send it to the address printed on your citation. OSHA office directory

Keep a copy of everything you send and the date you sent it.

Still needed from you

  • Your confirmation that all 7 items have been corrected, with the date and how
  • Verification of 7 abatement dates against your citation, settlement or final order: the public record does not settle them (see each item)
  • The name and title of the person signing
  • Signature of the employer or an authorized representative

Unlock this case

One-time payment per case. No subscription or scheduled renewal. Access continues while CiteClock operates, subject to the Terms of Service. Sales tax or VAT may be added at checkout where applicable.

Free preview

Free

You are looking at it.

  • Certification letter, item-by-item closeout and employee posting, drafted
  • Every item with its abatement date per the public record
  • Draft PDF marked DRAFT — PREVIEW

Self-Serve

$49 one time per case

A clear path from citation to a clean closeout packet, for one person.

  • One case · one user
  • Citation management and deadlines
  • Your own photos, PDFs and evidence
  • Missing-document checklist
  • Clean PDF and ZIP exports
  • Basic case history
Start Free — $49 at Export

COMMAND

$149 one time per case

Keep corrective work moving, from assignment to the next inspection.

  • Everything in Self-Serve
  • Up to 5 users on this case, including you
  • Corrective-action planning and task assignments
  • Secure worker evidence requests
  • Supervisor review and approval
  • Full audit history
  • Follow-up reminders and evidence checks
Unlock with COMMAND — $149
Exactly what the plan includes What you provide, what CiteClock drafts, what evidence the rule asks for and who signs
For this caseSelf-Serve $49 one time per caseCOMMAND $149 one time per case
What you provide
  • The facts from your citation and the dates you confirm.
  • What was corrected and when, in your own words, with supporting files.
  • The name and title of the person who signs.
  • The facts from your citation and the dates you confirm.
  • What was corrected and when, in your own words, with supporting files.
  • The name and title of the person who signs.
What CiteClock does
  • Software only: it does not read your photos, decide whether an item is fixed or check your workplace.
  • Organizes citation items, dates and your evidence.
  • Lists missing documents and builds clean PDF/ZIP outputs.
  • Keeps basic case history. One user on this case.
  • Software only: it does not read your photos, decide whether an item is fixed or check your workplace.
  • Organizes citation items, dates and your evidence.
  • Lists missing documents and builds clean PDF/ZIP outputs.
  • Adds draft corrective-action plans for you to review (drafted with AI; you decide what is kept), assignments, worker evidence links and supervisor approvals.
  • Keeps the full audit trail and schedules follow-up evidence checks.
  • Up to 5 people on this case, including its owner.
When it is ready
  • Work at your own pace. Download when you are ready.
  • Coordinate the work at your team’s pace. Download when you are ready.

Access continues while CiteClock operates, subject to the Terms of Service. Sales tax or VAT may be added at checkout where applicable. The $100 upgrade to COMMAND keeps the case's existing access terms. No subscription or scheduled renewal.

What evidence the rule asks for

  • Every item you certify: the date it was corrected and how (29 CFR 1903.19(c)).
  • Willful and repeat items: documents showing the correction, such as photos, receipts or training records (1903.19(d)).
  • Serious items: the same documents when your citation says so (1903.19(d)).
  • Other items: the rule does not require documents. A photo or record kept with the packet is optional.
  • Abatement plans and progress reports: only when your citation asks for them (1903.19(e) and (f)).

Read 29 CFR 1903.19

What you get

  • One PDF to sign and send: cover, items at a glance, the certification letter in the layout of OSHA's Appendix A sample (only the items you confirmed), each item with its files after it, the employee posting, where to send it and an evidence index.
  • Abatement plan and progress report forms in the Appendix B layout, when your citation requires them.
  • Your private case and archive: every file, confirmation and packet you send, kept with its date.

See a completed sample packet

Who verifies and signs

  • You confirm every fact. CiteClock never marks an item corrected for you.
  • The employer or an authorized representative signs the letter, sends the packet to the OSHA Area Office on the citation and posts the employee notice.
  • CiteClock lists what is missing. It cannot confirm a hazard was fixed, and it never signs, certifies or files anything with OSHA.

Not included

  • Legal advice, contesting or negotiating the citation, or dealing with OSHA for you. CiteClock is independent software, not a law firm, and not affiliated with OSHA.

You end with a packet like this one: See a completed sample packet

Your team does the corrective work. CiteClock keeps the tasks, evidence requests and closeout records together in one case.

Secure checkout by Paddle, our merchant of record. Organizing is free: sign in with your email and start. When you want the clean exports, confirm when the citation arrived, then pay. Full refund within 14 days.

Secure Checkout by Paddle. Billing note: Your purchase is for CiteClock. Paddle processes the payment as Merchant of Record. The operator’s registered name, Quote reclaim, may appear at checkout. Questions? hello@citeclock.com.

About CiteClock

CiteClock Support
Independent software for OSHA abatement closeouts

CiteClock was built so an employer can close out a citation without paying for hours of someone sorting files. The draft above was prepared from the public record before you arrived. Questions about your case? A person at CiteClock reads every message: hello@citeclock.com

  • Public data only on this page. Everything here comes from the U.S. Department of Labor's public enforcement data. Privacy · Terms
  • Your files stay private. Photos and documents you add go to your private case, never to this page. No third-party tracking pixels or ad trackers.
  • You stay in control. You confirm every item and sign the certification. CiteClock never certifies anything for you.
  • Refunds and support. Full refund within 14 days. Refund policy · hello@citeclock.com

Independent software. Not affiliated with OSHA. Not legal advice. CiteClock does not predict outcomes or penalty changes, and it does not sign or file anything with OSHA.

Standards cited in this inspection

Full citation text from the public record

7 items, as published
  • Citation 1 · Item 1

    Lockout/tagout (hazardous energy)

    $2,837proposed

    Serious29 CFR 1910.147(c)(4)(i)Correct by Nov 23, 2026
    What this standard covers

    Control of hazardous energy during servicing and maintenance of machines and equipment.

    Records you may want to gather

    • Existing energy-control procedures
    • Relevant training records
    • Periodic inspection records
    • Dated records of corrective work, if any

    As published in the public record

    19100147 C04 I

    Read the official standard
  • Citation 1 · Item 2

    Machine guarding

    $2,837proposed

    Serious29 CFR 1910.212(a)(1)Correct by Nov 23, 2026
    What this standard covers

    General requirements for guarding machines against hazards from operation and moving parts.

    Records you may want to gather

    • Dated photographs of the identified equipment
    • Existing guard inspection records
    • Repair receipts or corrective-work records, if any

    As published in the public record

    19100212 A01

    Read the official standard
  • Citation 1 · Item 3

    Electrical wiring methods and equipment

    $2,128proposed

    Serious29 CFR 1910.305(g)(1)(iii)Correct by Nov 23, 2026
    What this standard covers

    Wiring methods, components and equipment for general electrical use.

    Records you may want to gather

    • Existing written program or procedure, if one applies
    • Relevant training records
    • Dated photographs of the cited condition and any corrective work
    • Inspection, maintenance or repair records
    • Records of corrective actions already taken

    As published in the public record

    19100305 G01 III

    Read the official standard
  • Citation 1 · Item 4a

    Hazard communication

    $2,837proposed

    Serious29 CFR 1910.1200(e)(1)Correct by Nov 23, 2026
    What this standard covers

    Hazard communication, including chemical hazard information, labels, safety data sheets and training.

    Records you may want to gather

    • Existing written hazard communication program
    • Relevant safety data sheets and labels
    • Existing training records

    As published in the public record

    19101200 E01

    Read the official standard
  • Citation 1 · Item 4b

    Hazard communication

    $0proposed

    Serious29 CFR 1910.1200(f)(6)(i)Correct by Nov 23, 2026
    What this standard covers

    Hazard communication, including chemical hazard information, labels, safety data sheets and training.

    Records you may want to gather

    • Existing written hazard communication program
    • Relevant safety data sheets and labels
    • Existing training records

    As published in the public record

    19101200 F06 I

    Read the official standard
  • Citation 1 · Item 4c

    Hazard communication

    $0proposed

    Serious29 CFR 1910.1200(h)(1)Correct by Nov 23, 2026
    What this standard covers

    Hazard communication, including chemical hazard information, labels, safety data sheets and training.

    Records you may want to gather

    • Existing written hazard communication program
    • Relevant safety data sheets and labels
    • Existing training records

    As published in the public record

    19101200 H01

    Read the official standard
  • Citation 2 · Item 1

    Personal protective equipment

    $0proposed

    Other-than-serious29 CFR 1910.132(d)(2)Correct by Nov 23, 2026
    What this standard covers

    General requirements for personal protective equipment, including hazard assessment and training.

    Records you may want to gather

    • Existing written program or procedure, if one applies
    • Relevant training records
    • Dated photographs of the cited condition and any corrective work
    • Inspection, maintenance or repair records
    • Records of corrective actions already taken

    As published in the public record

    19100132 D02

    Read the official standard

Your response timeline

Contest and other responses, counted from the day you received the citation

Your response timeline

For certain responses, including a notice of contest, OSHA counts 15 working days from the day your company received the citation, not the date OSHA issued it. Enter that date to see the estimate.

The date it arrived (for example, the certified-mail delivery date).
An estimate from the date you enter. CiteClock does not verify when your citation arrived. Weekends and observed federal holidays are excluded; special closures or case-specific orders can change the timing. Confirm with the issuing OSHA area office or a qualified professional.How OSHA counts working days: 29 CFR 1903.22(c)

Plain-English guides: the first 15 working days after a citation, the informal conference and asking for more time to abate.

Official source

Official OSHA record · Inspection #1893105

Employer as published: FAUSTSON TOOL CORP.

From the public record as of Nov 21, 2026.

Public case information shown here is sourced from official public enforcement records published by the U.S. Department of Labor. Check it against OSHA's own page before you rely on anything here.

  • Employer name
  • Inspection number
  • Citation items and classifications
  • Proposed penalties
  • Issuance and abatement dates

Proposed penalties in the public record: $10,639. Proposed, not a final amount.

Verify on OSHA.gov

CiteClock is independent software. It is not OSHA, not affiliated with the U.S. Department of Labor or any government agency, and not a law firm. This page is not a government notice.

Working with an attorney or safety consultant?